how to reset the maintenance light on my Toyota Highlander Third Generation (2014-2019)

Toyota Highlander Third Generation (2014-2019)

Error Codes

5-10 minutes

Time

easy

Difficulty

low

Severity

2 min read

375 words

Problem Statement

Learn how to reset the maintenance light on your 2014-2019 Toyota Highlander with this step-by-step guide. Quick and easy instructions included.

Affected Component

Electrical

Estimated Time

5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in 'Park' or 'Neutral' and that the parking brake is engaged before performing the reset.

Symptoms

•Maintenance light illuminated on the dashboard
•No other warning lights present
•Vehicle operating normally otherwise

Diagnostic Steps

1
Ensure the vehicle is in the 'OFF' position.
2
Place the key in the ignition and turn it to the 'ON' position without starting the engine.
3
Press the gas pedal three times within five seconds.
4
Turn the ignition back to the 'OFF' position.
5
Start the engine to verify if the maintenance light is off.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Ignition key

Parts Required

•None required for resetting the maintenance light.

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

1. Preparation

Gather necessary tools such as the ignition key for the vehicle.
Ensure the vehicle is parked on a level surface with the engine turned off.

2. Ignition Positioning

Insert the key into the ignition.
Turn the ignition key to the "ON" position without starting the engine. This is the second position on the ignition switch.

3. Gas Pedal Sequence

Press down on the gas pedal fully three times in quick succession within five seconds.
Ensure that the pedal is released after each press.

4. Turn Off Ignition

Turn the ignition switch back to the "OFF" position.

5. Start the Engine

Start the engine to confirm that the maintenance light has been reset.
If the light is still on, repeat the sequence to ensure accuracy.