FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
how to reset the maintenance light in Toyota Highlander Third Generation (2014-2019) - Toyota Highlander
Home/Cars/Toyota/Highlander/Third Generation (2014-2019)/how to reset the maintenance light in Toyota Highlander Third Generation (2014-2019)

how to reset the maintenance light in Toyota Highlander Third Generation (2014-2019)

Toyota Highlander Third Generation (2014-2019)

Error Codes
5-10 minutes
Time
easy
Difficulty
low
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
2 min read
385 words

Problem Statement

Learn how to reset the maintenance light in Toyota Highlander Third Generation (2014-2019) with this step-by-step guide. Quick and easy instructions.

Affected Component
Electrical
Estimated Time
5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Ensure the vehicle is in 'Park' or 'Neutral' and the parking brake is engaged before performing the reset.

Symptoms

  • •Maintenance light illuminated on the dashboard
  • •Message indicating maintenance is due
  • •No engine performance issues associated with the light

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •None specifically required
  • •Flathead screwdriver (optional for accessing dashboard)

Parts Required

  • •None needed for resetting the maintenance light.

Additional Information

Affected Component
Electrical
Estimated Time
5-10 minutes
Difficulty
easy
Severity
low
Tools Required
2 items
Parts Required
1 item

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather necessary tools (if needed, for accessing the dashboard).
  • Ensure the vehicle is parked on a level surface with the ignition off.
2. Reset the Maintenance Light

  1. Access the Odometer Reset Button

    • Locate the odometer reset button on the instrument cluster.

  2. Turn the Ignition On

    • With the vehicle in the "Off" position, press and hold the odometer reset button.
    • Turn the ignition switch to the "On" position without starting the engine.

  3. Hold the Button

    • Keep the odometer reset button pressed until the maintenance light turns off, which may take approximately 10 seconds.

  4. Release and Verify

    • Release the odometer reset button after the light turns off.
    • Turn the ignition back to "Off" and then start the vehicle to ensure the maintenance light is no longer illuminated.