how to reset the check engine light on my Toyota Highlander Third Generation (2014-2019)

Toyota Highlander Third Generation (2014-2019)

Error Codes

15-30 minutes

Time

easy

Difficulty

medium

Severity

2 min read

392 words

Problem Statement

Learn how to reset the check engine light on your 2014-2019 Toyota Highlander. Step-by-step guide with diagnostic steps and safety tips.

Affected Component

Electrical

Estimated Time

15-30 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in a safe position while working on the electronics.

Symptoms

•Check engine light illuminated on the dashboard
•Previous diagnostic trouble codes stored in the vehicle's memory
•No noticeable performance issues

Diagnostic Steps

1
Scan the vehicle using an OBD-II scanner to retrieve any stored trouble codes.
2
Address any underlying issues indicated by the trouble codes.
3
Confirm that the check engine light is not illuminated due to a persistent issue before proceeding with the reset.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

1. Preparation

Ensure the vehicle is parked safely with the engine turned off.
Have an OBD-II scanner ready for use.

2. Connect OBD-II Scanner

Locate the OBD-II port under the dashboard, typically near the driver's seat.
Plug the OBD-II scanner into the port securely.

3. Read and Clear Codes

Turn the ignition to the "ON" position without starting the engine.
Power on the OBD-II scanner.
Follow the scanner's prompts to read diagnostic trouble codes.
After noting any codes, select the option to clear or erase the codes.

4. Disconnect Scanner

Once the codes are cleared, turn off the ignition.
Unplug the OBD-II scanner from the port.

5. Test the Vehicle

Start the engine and check to ensure that the check engine light is no longer illuminated.
Drive the vehicle for a short period to ensure the light does not return.