how to replace the windshield wipers on my Toyota Highlander Third Generation (2014-2019)?

Toyota Highlander Third Generation (2014-2019)

Error Codes

15-30 minutes

Time

easy

Difficulty

medium

Severity

3 min read

452 words

Problem Statement

Step-by-step guide to replace windshield wipers on Toyota Highlander (2014-2019). Learn symptoms, diagnostic steps, and tools required for effective replacement.

Affected Component

Body/Interior

Estimated Time

15-30 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the wiper arms are securely held in place while working to prevent them from snapping back.

Symptoms

•Wipers leave streaks on the windshield
•Wipers skip or chatter during operation
•Wipers do not make full contact with the windshield
•Wipers are cracked or damaged
•Wipers do not operate at all

Diagnostic Steps

1
Inspect wiper blades for visible damage or wear.
2
Test wipers on different speeds to check functionality.
3
Check wiper arm tension by gently lifting the wiper arm off the windshield.
4
Verify that the wiper motor is operational by listening for noise when activating the wipers.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Flathead screwdriver
•Clean cloth

Parts Required

•New windshield wiper blades

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

1. Preparation

Gather tools and materials: new wiper blades, a flathead screwdriver (if needed), and a clean cloth.
Park the vehicle on a flat surface and turn off the ignition.

2. Lift Wiper Arms

Carefully lift the wiper arms away from the windshield until they are in a vertical position.
Ensure that the arms are securely held in place to prevent them from snapping back down.

3. Remove Old Wiper Blades

Locate the release tab on the wiper blade where it connects to the wiper arm.
Press the release tab and slide the wiper blade downwards off the wiper arm.
If necessary, use a flathead screwdriver to gently pry off the old blade.

4. Install New Wiper Blades

Take the new wiper blade and align it with the wiper arm.
Slide the wiper blade onto the arm until you hear a click, indicating it is securely locked in place.
Repeat this process for the other wiper blade.

5. Lower Wiper Arms

Gently lower the wiper arms back onto the windshield.
Ensure they are correctly positioned and not touching the glass at an angle.

6. Test Wipers

Start the vehicle and activate the wipers to ensure they function smoothly and make proper contact with the windshield.