how to replace the windshield wiper blades on my Toyota Highlander Third Generation (2014-2019)?

Toyota Highlander Third Generation (2014-2019)

Error Codes

15-30 minutes

Time

easy

Difficulty

low

Severity

3 min read

481 words

Problem Statement

Step-by-step guide to replace windshield wiper blades on Toyota Highlander (2014-2019). Learn symptoms, diagnostic steps, and installation tips.

Affected Component

Body/Interior

Estimated Time

15-30 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is off before working on wiper blades to avoid accidental movement.

Symptoms

•Streaking on the windshield during operation
•Wiper blades skipping or chattering
•Noisy operation when wipers are in use
•Wipers not making proper contact with the windshield
•Frayed or torn rubber on the wiper blades

Diagnostic Steps

1
Inspect the wiper blades visually for signs of damage or wear.
2
Test the wipers in different settings to determine if they operate smoothly.
3
Check the wiper arm tension to ensure proper contact with the windshield.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Clean cloth

Parts Required

•Replacement windshield wiper blades (26 inches for driver's side, 22 inches for passenger's side)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

1. Preparation

Gather tools: no special tools are required, but having a clean cloth can help.
Purchase replacement wiper blades compatible with 2014-2019 Toyota Highlander (typically, 26 inches for the driver’s side and 22 inches for the passenger's side).

2. Turn Off the Wipers

Ensure the vehicle is turned off and the wipers are in the resting position.
If necessary, switch the ignition on and off to bring the wipers to the vertical position for easier access.

3. Remove Old Wiper Blades

Driver's Side:
- Lift the wiper arm away from the windshield until it locks in an upright position.
- Locate the release tab on the wiper blade assembly.
- Press the tab and slide the wiper blade downward off the wiper arm.
Passenger's Side:
- Repeat the same process as for the driver's side.

4. Install New Wiper Blades

Driver's Side:
- Align the new wiper blade with the wiper arm.
- Slide the blade onto the arm until you hear a click, indicating it’s secured.
Passenger's Side:
- Repeat the same installation process as for the driver's side.

5. Lower Wiper Arms

Carefully lower the wiper arms back to their resting position against the windshield.

6. Test Wipers

Turn on the vehicle and operate the wipers to ensure they function correctly and make proper contact with the windshield.