FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
how to fix the door ajar warning light staying on in my Toyota Highlander - Toyota Highlander
Home/Cars/Toyota/Highlander/Third Generation (2014-2019)/how to fix the door ajar warning light staying on in my Toyota Highlander

how to fix the door ajar warning light staying on in my Toyota Highlander

Toyota Highlander Third Generation (2014-2019)

Error Codes
1-2 hours
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
509 words

Problem Statement

Learn how to fix the door ajar warning light staying on in your Toyota Highlander. Step-by-step guide with diagnostic steps and repair instructions.

Affected Component
Electrical
Estimated Time
1-2 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Disconnect battery before working on electrical systems to prevent shocks or shorts.

Symptoms

  • •Door ajar warning light remains on even when all doors are closed
  • •Difficulty locking or unlocking doors with the remote
  • •Interior lights staying on when the vehicle is off
  • •Possible battery drain due to lights remaining on
  • •Alerts or chimes indicating doors are not properly closed

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •Socket set
  • •Multimeter
  • •Screwdrivers

Parts Required

  • •Door ajar switch (if replacement is needed)
  • •Electrical connectors (if damaged)

Additional Information

Affected Component
Electrical
Estimated Time
1-2 hours
Difficulty
medium
Severity
medium
Tools Required
3 items
Parts Required
2 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather tools and parts.
  • Disconnect the vehicle's battery to ensure safety during repairs.
  • Tools Required: Socket set, multimeter, screwdrivers.
2. Inspect Door Latches
  • Open each door and visually inspect the door latches for any obstructions or mechanical issues.
  • Ensure that all doors align properly with their respective latches when closed.
  • If necessary, adjust the striker plate on the door frame to ensure a tighter fit.
3. Test and Replace Door Ajar Switch
  • Locate the door ajar switch, typically located in the door latch assembly.
  • Disconnect the wiring harness from the switch.
  • Use a multimeter to test the switch for continuity; it should show closed when the door is closed and open when the door is open.
  • If the switch is faulty, replace it with a new one by removing any screws or clips holding it in place and installing the new switch.
  • Reconnect the wiring harness.
4. Inspect Electrical Connections
  • Examine the wiring and connectors for wear, corrosion, or damage.
  • Clean any corroded terminals using electrical cleaner and a wire brush.
  • Repair or replace damaged wiring as necessary.
5. Reassemble and Test
  • Reinstall any panels or covers removed during the process.
  • Reconnect the vehicle's battery.
  • Test each door to ensure that the warning light turns off when all doors are closed.