why is my Toyota Corolla E210 (2019-2024) remote start not working

Toyota Corolla E210 (2019-2024)

Error Codes

1-2 hours

Time

medium

Difficulty

medium

Severity

3 min read

429 words

Problem Statement

Learn how to diagnose and fix the remote start issue in your 2019-2024 Toyota Corolla E210. Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component

Electrical

Estimated Time

1-2 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical systems

Symptoms

•Remote start button does not respond when pressed
•Engine does not start or crank when using the remote
•Warning lights illuminated on the dashboard
•Key fob battery may be low or dead
•Vehicle security system may be activated, blocking remote start
•The vehicle may require the key fob to be inside to start

Diagnostic Steps

1
Check the key fob battery level and replace if necessary
2
Ensure the vehicle is in park and all doors are closed
3
Scan for error codes using an OBD-II scanner to identify any underlying issues
4
Inspect the vehicle's security system for any alerts or malfunctions
5
Confirm that the remote start feature is enabled in the vehicle's settings or owner’s manual
6
Test the key fob functionality by attempting to unlock or lock the vehicle

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Small flathead screwdriver

Parts Required

•CR2032 key fob battery

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Symptoms

•Remote start button does not respond when pressed

•Engine does not start or crank when using the remote

•Warning lights illuminated on the dashboard

•Key fob battery may be low or dead

•Vehicle security system may be activated, blocking remote start

•The vehicle may require the key fob to be inside to start

Diagnostic Steps

1
Check the key fob battery level and replace if necessary
2
Ensure the vehicle is in park and all doors are closed
3
Scan for error codes using an OBD-II scanner to identify any underlying issues
4
Inspect the vehicle's security system for any alerts or malfunctions
5
Confirm that the remote start feature is enabled in the vehicle's settings or owner’s manual
6
Test the key fob functionality by attempting to unlock or lock the vehicle

Solution

1. Key Fob Battery Replacement

Sub-steps:
1. Open the key fob using a small flathead screwdriver.
2. Replace the old battery with a new CR2032 battery (ensure correct polarity).
3. Reassemble the key fob and test the remote start function.

2. Verify Vehicle Settings

Sub-steps:
1. Enter the vehicle and turn on the ignition.
2. Navigate to the vehicle settings on the infotainment system.
3. Locate the remote start settings and ensure it is enabled.
4. Save changes and exit settings.

3. Check Security System

Sub-steps:
1. Inspect the vehicle's dashboard for any security warning lights.
2. If illuminated, follow the reset procedure in the owner’s manual.
3. If issues persist, consult a professional for inspection of the security module.

4. System Reset

Sub-steps:
1. Disconnect the negative terminal of the battery for 10 minutes.
2. Reconnect the battery terminal and ensure a secure connection.
3. Test the remote start function again.