FAULTBASE
NEWSASKCars
© 2025 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
Home/Cars/Toyota/Corolla/E210 (2019-2024)/what does it mean if my Toyota Corolla E210 (2019-2024) shows a P0301 code?

what does it mean if my Toyota Corolla E210 (2019-2024) shows a P0301 code?

Toyota Corolla E210 (2019-2024)

Severity: highDifficulty: mediumError Code: P03012-4 hours
3 min read
599 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix P0301 cylinder 1 misfire in Toyota Corolla. Step-by-step guide with diagnostic procedures and repair instructions.

Error Code
P0301
Component
Engine
Repair Time
2-4 hours

Safety Warnings

  • ⚠Disconnect the battery before working on electrical components to avoid shock or short circuits.
  • ⚠Allow the engine to cool before performing any work on the ignition or fuel systems.

Symptoms

  • •Check engine light illuminated
  • •Rough idle or stalling
  • •Loss of power during acceleration
  • •Increased fuel consumption
  • •Engine shaking or vibrations

Diagnostic Steps

  1. 1Scan for error codes using an OBD-II scanner to confirm P0301 and check for any related codes.
  2. 2Inspect the ignition system components, including spark plugs, ignition coils, and wiring for signs of wear or damage.
  3. 3Check fuel injector operation for cylinder 1 to ensure it is functioning properly.
  4. 4Perform a compression test on cylinder 1 to rule out mechanical issues.
  5. 5Inspect vacuum lines and intake manifold for leaks that may affect cylinder 1 operation.
  6. 6Monitor the engine's live data for fuel trim readings and misfire counts.

Solution

Solution

1. Preparation

  • Gather necessary tools and parts.
  • Disconnect the negative battery terminal to prevent electrical shorts.

2. Inspect and Replace Spark Plug

  • Tools Required: Socket set, torque wrench, spark plug gap tool.
  • Remove the engine cover if applicable.
  • Disconnect the ignition coil connector and remove the ignition coil.
  • Remove the spark plug using a spark plug socket.
  • Inspect the spark plug for wear or damage; replace if necessary.
  • Ensure the gap on the new spark plug is set to manufacturer specifications (typically around 0.044 inches for a Toyota).
  • Install the new spark plug and torque it to the manufacturer’s specifications (usually around 13 lb-ft).
  • Reinstall the ignition coil and connect the electrical connector.

3. Inspect and Replace Ignition Coil

  • If the spark plug replacement does not resolve the issue, proceed to inspect the ignition coil.
  • Tools Required: Socket set.
  • Remove the ignition coil from cylinder 1.
  • Test the ignition coil with a multimeter for resistance; compare readings to specifications.
  • Replace the ignition coil if it is out of specification.
  • Reinstall the new ignition coil and reconnect the harness.

4. Test Fuel Injector

  • Tools Required: Fuel injector tester (if applicable).
  • Remove the fuel injector connector from cylinder 1.
  • Test the fuel injector for proper operation with the tester or by performing a resistance check.
  • Replace the fuel injector if it is faulty.

5. Check Compression

  • Tools Required: Compression tester.
  • Remove the spark plug from cylinder 1.
  • Insert the compression tester and crank the engine for a few seconds.
  • Compare the compression reading to specifications; replace or repair the engine if low compression is found.

Verification

After completing the repair, verify that the issue has been resolved:

  • Test the affected component to ensure it functions correctly
  • Check for any error codes or warning lights
  • Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • OBD-II scanner
  • Socket set
  • Torque wrench
  • Spark plug gap tool
  • Compression tester
  • Multimeter
  • Fuel injector tester

Parts Required

  • Spark plug (if needed)
  • Ignition coil (if needed)
  • Fuel injector (if needed)

Additional Information

Error CodeP0301
Component

Engine

Repair Time

2-4 hours

Difficulty

medium

Severity

high

Tools

7 items

Parts

3 items

Related Faults

Discover similar issues

  1. Why does the engine of my Toyota Corolla E210 make a knocking noise during acceleration?

    Resolve engine knocking in Toyota Corolla E210 with this detailed guide. Diagnose and fix issues causing noise during acceleration.

    Component:Engine
    Symptoms
    • •Knocking noise during acceleration
    • •Possible decrease in engine performance
    • +{count} more

  2. What are the signs of a failing fuel pump in a Toyota Corolla E210?

    Signs of a failing fuel pump in a Toyota Corolla E210 (2019-2024) can manifest in various ways. Here are the common symptoms, diagnostic steps, tools ...

  3. Why is the check engine light on in my 2019 Toyota Corolla E210, and how can I diagnose it?

    P0300, P0171, P0420

    Diagnose the check engine light on your 2019 Toyota Corolla E210. Follow our step-by-step guide to identify and resolve issues.

    Component:Engine
    Symptoms
    • •Check engine light
    • •Rough idle
    • +{count} more

  4. Infotainment System Freezing or Not Responding

    The Toyota Corolla E210 infotainment system (Entune 3.0 or Audio Plus) may freeze, become unresponsive, or restart unexpectedly. This can affect radio...

    Component:Infotainment System
    Symptoms
    • •Screen freezes or black screen
    • •Touch screen not responding
    • +{count} more

  5. How to resolve the problem of the check engine light frequently turning on in a Corolla E210?

    When the check engine light frequently turns on in a Toyota Corolla E210 (2019-2024), it indicates that the vehicle's onboard diagnostics system has d...

  6. How do I resolve a transmission fluid leak in my 2023 Toyota Corolla E210?

    Resolve transmission fluid leaks in your 2023 Toyota Corolla E210 with this step-by-step guide. Learn diagnostic and repair procedures.

    Component:Transmission
    Symptoms
    • •Puddle of red fluid under the vehicle
    • •Low transmission fluid level warning light
    • +{count} more

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation