FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
how to reset the maintenance light on Toyota Corolla E210 (2019-2024)? - Toyota Corolla
Home/Cars/Toyota/Corolla/E210 (2019-2024)/how to reset the maintenance light on Toyota Corolla E210 (2019-2024)?

how to reset the maintenance light on Toyota Corolla E210 (2019-2024)?

Toyota Corolla E210 (2019-2024)

Error Codes
5 minutes
Time
easy
Difficulty
low
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
2 min read
388 words

Problem Statement

Learn how to reset the maintenance light on Toyota Corolla E210 (2019-2024) with this step-by-step guide. Quick and easy procedure.

Affected Component
Electrical
Estimated Time
5 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Ensure the vehicle is in 'Park' or 'Neutral' and on a flat surface to prevent any movement.

Symptoms

  • •Maintenance light illuminated on the dashboard
  • •Reminder message displayed on the multi-information display
  • •No effect on vehicle performance

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •None required

Parts Required

  • •None required

Additional Information

Affected Component
Electrical
Estimated Time
5 minutes
Difficulty
easy
Severity
low
Tools Required
1 item
Parts Required
1 item

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Ensure the vehicle is parked on a flat surface.
  • Gather necessary tools: None required for this procedure.
2. Reset Maintenance Light
  1. Turn off the Engine: Ensure the engine is completely off.
  2. Locate the Trip Meter Reset Button: This is typically found on the instrument panel.
  3. Press and Hold the Button: Hold down the trip meter reset button.
  4. Turn Ignition to "ON": While still holding the button, turn the ignition key to the "ON" position (do not start the engine).
  5. Watch for Maintenance Light: Keep holding the button until the maintenance light flashes and goes out.
  6. Release the Button: Once the light is off, release the trip meter reset button.
  7. Turn Ignition Off: Turn the ignition switch back to the "OFF" position.
  8. Start the Engine: Start the vehicle to check that the maintenance light is no longer illuminated.