FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
how to reset the maintenance light on Toyota Corolla E210 (2019-2024) - Toyota Corolla
Home/Cars/Toyota/Corolla/E210 (2019-2024)/how to reset the maintenance light on Toyota Corolla E210 (2019-2024)

how to reset the maintenance light on Toyota Corolla E210 (2019-2024)

Toyota Corolla E210 (2019-2024)

Error Codes
5-10 minutes
Time
easy
Difficulty
low
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
2 min read
349 words

Problem Statement

Learn how to reset the maintenance light on Toyota Corolla E210 (2019-2024) after maintenance. Step-by-step guide for a quick reset.

Affected Component
Electrical
Estimated Time
5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Ensure the vehicle is in park and the ignition is off before attempting the reset procedure.

Symptoms

  • •Maintenance light illuminated on the dashboard
  • •Notification for scheduled maintenance displayed
  • •Oil change or service reminder remains active

Diagnostic Steps

  1. 1
  2. 2
  3. 3

Solution

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •None required for the reset process.

Parts Required

  • •None required for the reset process.

Additional Information

Affected Component
Electrical
Estimated Time
5-10 minutes
Difficulty
easy
Severity
low
Tools Required
1 item
Parts Required
1 item

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Ensure the vehicle is parked on a level surface.
  • Turn the ignition to the "On" position without starting the engine.
2. Reset the Maintenance Light

  1. Set the Odometer:

    • Press and hold the trip meter reset button on the instrument cluster until the odometer display shows "Trip A."

  2. Turn Off the Ignition:

    • Turn the ignition off completely.

  3. Turn the Ignition On Again:

    • While holding the trip meter reset button, turn the ignition back to the "On" position (do not start the engine).

  4. Continue Holding the Button:

    • Keep the trip meter reset button pressed until the maintenance light flashes and then turns off (this may take about 10 seconds).

  5. Release the Button:

    • Once the light goes off, release the trip meter reset button.
3. Confirm Reset
  • Turn the ignition off and then back on to ensure the maintenance light is no longer illuminated.