FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
how to reset the maintenance light on Toyota Corolla E210 (2019-2024) - Toyota Corolla
Home/Cars/Toyota/Corolla/E210 (2019-2024)/how to reset the maintenance light on Toyota Corolla E210 (2019-2024)

how to reset the maintenance light on Toyota Corolla E210 (2019-2024)

Toyota Corolla E210 (2019-2024)

Error Codes
Less than 15 minutes
Time
easy
Difficulty
low
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
422 words

Problem Statement

Learn how to reset the maintenance light on your 2019-2024 Toyota Corolla E210 with this step-by-step guide. Quick and easy procedure.

Affected Component
Electrical
Estimated Time
Less than 15 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Ensure the vehicle is in 'Park' and on a flat surface before starting the reset procedure.

Symptoms

  • •Maintenance light illuminated on the dashboard
  • •Reminder to perform oil change or other service
  • •No engine performance issues related to the light

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •None required for this procedure.

Parts Required

  • •None required for this procedure.

Additional Information

Affected Component
Electrical
Estimated Time
Less than 15 minutes
Difficulty
easy
Severity
low
Tools Required
1 item
Parts Required
1 item

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather necessary tools: None required for this procedure.
  • Ensure the vehicle is parked on a level surface with the engine off.
2. Reset Maintenance Light

  1. Power Off the Vehicle

    • Ensure the ignition is turned off completely.

  2. Press Trip Meter Reset Button

    • Locate the trip meter reset button on the dashboard, typically near the odometer display.
    • Press and hold the button.

  3. Turn Ignition On

    • While holding the trip meter reset button, turn the ignition key to the "ON" position (do not start the engine).

  4. Wait for the Reset Process

    • Continue holding the trip meter reset button until the maintenance light starts to flash, then turns off. This indicates that the reset is complete.

  5. Release the Button

    • Let go of the trip meter reset button once the light goes off.

  6. Verify Reset

    • Turn the ignition back to the "OFF" position and then start the engine to confirm that the maintenance light is no longer illuminated.