FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
how to reset the maintenance light on my Toyota Corolla E210 (2019-2024) - Toyota Corolla
Home/Cars/Toyota/Corolla/E210 (2019-2024)/how to reset the maintenance light on my Toyota Corolla E210 (2019-2024)

how to reset the maintenance light on my Toyota Corolla E210 (2019-2024)

Toyota Corolla E210 (2019-2024)

Error Codes
5-10 minutes
Time
easy
Difficulty
low
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
2 min read
382 words

Problem Statement

Learn how to reset the maintenance light on your 2019-2024 Toyota Corolla E210. Step-by-step guide for a quick and easy reset process.

Affected Component
Electrical
Estimated Time
5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Ensure the vehicle is in a safe location with the engine off before performing the reset process.

Symptoms

  • •Maintenance light illuminated on the dashboard
  • •Reminder for scheduled maintenance is displayed
  • •Message indicating 'Oil Maintenance Required' or similar

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Solution

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •None specifically required, just the vehicle's ignition key

Parts Required

  • •None required for this procedure.

Additional Information

Affected Component
Electrical
Estimated Time
5-10 minutes
Difficulty
easy
Severity
low
Tools Required
1 item
Parts Required
1 item

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Ensure the vehicle is in "Park" and turned off.
  • Gather any necessary tools for access if needed (e.g., a small flashlight).
2. Reset the Maintenance Light
  1. Turn Off Ignition: Ensure the ignition switch is turned to "OFF."
  2. Press and Hold Odometer Reset Button: Locate the odometer reset button on the instrument panel and press it. Hold it down throughout the reset process.
  3. Turn Ignition On: While still holding the odometer button, turn the ignition switch to the "ON" position (do not start the engine).
  4. Monitor Maintenance Light: Keep holding the odometer button until the maintenance light starts blinking and then turns off. This indicates that the reset is successful.
  5. Turn Ignition Off: Release the odometer button and turn the ignition switch back to the "OFF" position.