FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
how to reset the maintenance light on my Toyota Corolla E210 (2019-2024)? - Toyota Corolla
Home/Cars/Toyota/Corolla/E210 (2019-2024)/how to reset the maintenance light on my Toyota Corolla E210 (2019-2024)?

how to reset the maintenance light on my Toyota Corolla E210 (2019-2024)?

Toyota Corolla E210 (2019-2024)

Error Codes
5-10 minutes
Time
easy
Difficulty
low
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
2 min read
357 words

Problem Statement

Learn how to reset the maintenance light on your 2019-2024 Toyota Corolla E210 with this step-by-step guide. Quick and easy instructions included.

Affected Component
Electrical
Estimated Time
5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Ensure the vehicle is in park and the engine is off before beginning the reset procedure.

Symptoms

  • •Maintenance light illuminated on the dashboard
  • •Message displayed indicating maintenance due
  • •Vehicle performance may be normal, but light remains on

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Solution

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •None

Parts Required

  • •None

Additional Information

Affected Component
Electrical
Estimated Time
5-10 minutes
Difficulty
easy
Severity
low
Tools Required
1 item
Parts Required
1 item

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather necessary tools: none required for this process.
  • Ensure the vehicle is parked on a level surface and the engine is off.
2. Reset Maintenance Light

  1. Turn Off the Vehicle

    • Make sure the ignition is completely off.

  2. Press and Hold the Trip Reset Button

    • Locate the trip meter reset button on the instrument cluster.
    • Press and hold the button.

  3. Turn Ignition to ON

    • While holding the reset button, turn the ignition switch to the "ON" position (do not start the engine).

  4. Wait for the Light to Reset

    • Continue to hold the reset button until the maintenance light begins to flash and then turns off.

  5. Release the Reset Button

    • Once the light is off, release the trip reset button.