FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
how to reset the maintenance light on my Toyota Corolla E210 (2019-2024) - Toyota Corolla
Home/Cars/Toyota/Corolla/E210 (2019-2024)/how to reset the maintenance light on my Toyota Corolla E210 (2019-2024)

how to reset the maintenance light on my Toyota Corolla E210 (2019-2024)

Toyota Corolla E210 (2019-2024)

Error Codes
5-10 minutes
Time
easy
Difficulty
low
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
2 min read
372 words

Problem Statement

Learn how to reset the maintenance light on your 2019-2024 Toyota Corolla E210 with this step-by-step guide. Quick and easy instructions included.

Affected Component
Electrical
Estimated Time
5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Ensure the vehicle is in a safe, stationary position before performing the reset.

Symptoms

  • •Maintenance light illuminated on the dashboard
  • •No other warning lights present
  • •Vehicle is operating normally otherwise

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Solution

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •None specifically required
  • •Small flashlight (optional)

Parts Required

  • •None required for this procedure.

Additional Information

Affected Component
Electrical
Estimated Time
5-10 minutes
Difficulty
easy
Severity
low
Tools Required
2 items
Parts Required
1 item

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather all necessary tools.
  • Ensure the vehicle is parked on a level surface with the engine off.
  • Have the owner's manual available for reference.
2. Reset Maintenance Light

  1. Turn Off the Engine

    • Ensure the engine is completely off before beginning.

  2. Press and Hold the Trip Button

    • Locate the "Trip" button on the instrument panel.
    • Press and hold the button down.

  3. Turn the Ignition On

    • Turn the ignition switch to the "ON" position. Do not start the engine.
    • You should see the dashboard lights illuminate.

  4. Wait for the Maintenance Light to Blink

    • Continue holding the "Trip" button until the maintenance light blinks and then goes out (usually takes about 10 seconds).

  5. Release the Button and Turn Off Ignition

    • Release the "Trip" button.
    • Turn the ignition back to the "OFF" position.