FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
how to reset the maintenance light on my Toyota Corolla E210 (2019-2024)? - Toyota Corolla
Home/Cars/Toyota/Corolla/E210 (2019-2024)/how to reset the maintenance light on my Toyota Corolla E210 (2019-2024)?

how to reset the maintenance light on my Toyota Corolla E210 (2019-2024)?

Toyota Corolla E210 (2019-2024)

Error Codes
5-10 minutes
Time
easy
Difficulty
low
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
405 words

Problem Statement

Learn how to reset the maintenance light on your Toyota Corolla E210 (2019-2024) with this step-by-step guide. Quick and easy instructions included.

Affected Component
Electrical
Estimated Time
5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Ensure the vehicle is in a safe location to prevent unintended movement while performing the reset.

Symptoms

  • •Maintenance light illuminated on the dashboard
  • •Reminder for oil change or service due message displayed
  • •No other performance issues noted

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •Key or key fob

Parts Required

  • •None required for resetting the maintenance light.

Additional Information

Affected Component
Electrical
Estimated Time
5-10 minutes
Difficulty
easy
Severity
low
Tools Required
1 item
Parts Required
1 item

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather necessary tools (minimal tools required).
  • Ensure the vehicle is in a safe location with the parking brake engaged.
  • Have the vehicle key or fob ready.
2. Resetting the Maintenance Light

  1. Turn Ignition On

    • Place the key in the ignition and turn to the "ON" position (do not start the engine).

  2. Set Odometer to Trip A

    • Locate the trip meter button on the dashboard.
    • Press the button until "Trip A" is displayed on the odometer.

  3. Turn Ignition Off

    • Turn the ignition back to the "OFF" position.

  4. Hold Trip Button

    • Press and hold the trip button down.

  5. Turn Ignition On Again

    • While holding the trip button, turn the ignition back to the "ON" position.

  6. Wait for Reset

    • Keep holding the trip button until the maintenance light blinks and then turns off (approximately 10 seconds).

  7. Release Trip Button

    • Once the light is off, release the trip button.