FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
how to reset the maintenance light on my Toyota Corolla E210 (2019-2024) - Toyota Corolla
Home/Cars/Toyota/Corolla/E210 (2019-2024)/how to reset the maintenance light on my Toyota Corolla E210 (2019-2024)

how to reset the maintenance light on my Toyota Corolla E210 (2019-2024)

Toyota Corolla E210 (2019-2024)

Error Codes
less than 10 minutes
Time
easy
Difficulty
low
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
2 min read
361 words

Problem Statement

Learn how to reset the maintenance light on your 2019-2024 Toyota Corolla E210 with this step-by-step guide. Quick and easy instructions included.

Affected Component
Electrical
Estimated Time
less than 10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Ensure the vehicle is in a safe environment and the ignition is off before performing the reset.

Symptoms

  • •Maintenance light illuminated on the dashboard
  • •No other performance issues are present
  • •Reminder for oil change or scheduled maintenance due

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Solution

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •None

Parts Required

  • •None

Additional Information

Affected Component
Electrical
Estimated Time
less than 10 minutes
Difficulty
easy
Severity
low
Tools Required
1 item
Parts Required
1 item

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Ensure the vehicle is parked safely and the ignition is off.
  • Gather necessary tools: none required for this reset.
2. Reset Maintenance Light

  1. Turn Off Ignition

    • Make sure the ignition is completely off before starting the reset process.

  2. Press and Hold Trip Meter Button

    • Locate the trip meter reset button on the instrument panel.
    • Press and hold this button down throughout the reset process.

  3. Turn Ignition On

    • Turn the ignition switch to the "On" position without starting the engine. The dashboard lights should illuminate.

  4. Hold Until Light Resets

    • Keep holding the trip meter reset button until the maintenance light blinks and subsequently turns off, indicating the reset is complete.

  5. Release Button

    • Once the light is off, release the trip meter reset button.