FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
how to reset the maintenance light on my Toyota Corolla E210 (2019-2024) - Toyota Corolla
Home/Cars/Toyota/Corolla/E210 (2019-2024)/how to reset the maintenance light on my Toyota Corolla E210 (2019-2024)

how to reset the maintenance light on my Toyota Corolla E210 (2019-2024)

Toyota Corolla E210 (2019-2024)

Error Codes
5 minutes
Time
easy
Difficulty
low
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
2 min read
317 words

Problem Statement

Learn how to reset the maintenance light on your 2019-2024 Toyota Corolla E210. Step-by-step guide with diagnostic procedures and instructions.

Affected Component
Electrical
Estimated Time
5 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Ensure the vehicle is in a safe location and not in motion when performing this reset.

Symptoms

  • •Maintenance light illuminated on the dashboard
  • •Reminder notifications for oil change or service
  • •No other engine performance issues present

Diagnostic Steps

  1. 1
  2. 2
  3. 3

Solution

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •Vehicle key or key fob

Parts Required

  • •None required for this procedure.

Additional Information

Affected Component
Electrical
Estimated Time
5 minutes
Difficulty
easy
Severity
low
Tools Required
1 item
Parts Required
1 item

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather necessary tools, though this process typically requires no special tools.
  • Ensure the vehicle is parked on a level surface and in the "ON" position.
2. Reset the Maintenance Light
  1. Turn the ignition to the "ON" position: Do not start the engine; just turn the key or push the start button without pressing the brake pedal.
  2. Press the trip meter reset button: Hold the button until the trip meter displays "000000" or "Trip A."
  3. Turn the ignition off: Release the trip meter reset button and turn the ignition back to the "OFF" position.
  4. Turn the ignition back to the "ON" position: Again, do not start the engine.
  5. Check the maintenance light: If done correctly, the maintenance light should now be off.