how to fix the rearview camera not working in my Toyota Corolla E210

Toyota Corolla E210 (2019-2024)

Error Codes

1-2 hours

Time

medium

Difficulty

medium

Severity

3 min read

542 words

Problem Statement

Learn how to diagnose and fix the rearview camera not working in Toyota Corolla E210. Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component

Electrical

Estimated Time

1-2 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical systems to avoid short circuits.

Symptoms

•Rearview camera display is blank
•Camera image is distorted or fuzzy
•"Check Surroundings" warning message appears on the screen
•Reverse gear engagement does not activate the camera
•No sound or indication when the vehicle is in reverse

Diagnostic Steps

1
Inspect the camera lens for any obstructions or dirt that may affect visibility.
2
Check the vehicle's display settings to ensure the rearview camera is enabled.
3
Use an OBD-II scanner to check for any error codes related to the camera system.
4
Inspect the wiring harness connected to the rearview camera for any damage or loose connections.
5
Test the rearview camera with a multimeter to ensure it is receiving power.
6
Verify the reverse light operation to ensure the camera activates when the vehicle is in reverse.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Multimeter
•Screwdriver set
•Electrical tape
•Soft cloth and automotive glass cleaner

Parts Required

•Replacement rearview camera (if necessary)
•Fuses (if blown)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect the camera lens for any obstructions or dirt that may affect visibility.
2
Check the vehicle's display settings to ensure the rearview camera is enabled.
3
Use an OBD-II scanner to check for any error codes related to the camera system.
4
Inspect the wiring harness connected to the rearview camera for any damage or loose connections.
5
Test the rearview camera with a multimeter to ensure it is receiving power.
6
Verify the reverse light operation to ensure the camera activates when the vehicle is in reverse.

Solution

1. Preparation

Gather required tools and replacement parts.
Disconnect the negative battery terminal to ensure safety while working on electrical systems.

2. Inspect and Clean Camera Lens

Locate the rearview camera mounted on the rear of the vehicle.
Clean the camera lens with a soft cloth and automotive glass cleaner to remove any dirt or debris.

3. Check and Repair Wiring

Remove any covers or panels to access the wiring harness connected to the rearview camera.
Inspect the wiring for any signs of wear, fraying, or disconnection.
Repair or replace any damaged wiring using appropriate connectors and electrical tape.

4. Test Camera Power Supply

Using a multimeter, test the voltage at the camera connector.
If no voltage is detected, trace the wiring back to the vehicle's computer or fuse box to identify and fix any breaks in the circuit.
Replace any blown fuses related to the rearview camera system.

5. Replace Camera (if necessary)

If the camera is determined to be faulty, remove the old camera by unscrewing it from its mount.
Disconnect the wiring harness from the old camera.
Install the new camera by connecting the wiring harness and securing it in place.
Reinstall any panels or covers removed during the process.