FAULTBASE
Error CodesASKCars
© 2025 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
Home/Cars/Toyota/Corolla/E210 (2019-2024)/how to fix P0174 code in Toyota Corolla E210 (2019-2024)

how to fix P0174 code in Toyota Corolla E210 (2019-2024)

Toyota Corolla E210 (2019-2024)

Error Codes
Severity: highDifficulty: mediumError Code: P01742-4 hours
4 min read
639 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix P0174 engine too lean condition in Toyota Corolla E210. Step-by-step guide with diagnostic procedures and repair instructions.

Error Code
P0174
Affected Component
Engine
Estimated Time
2-4 hours

Safety Warnings

  • ⚠Disconnect the battery before working on electrical systems.
  • ⚠Relieve fuel pressure before disconnecting fuel lines to avoid fuel spray.

Symptoms

  • •Check engine light illuminated
  • •Decreased engine performance
  • •Rough idle or stalling
  • •Poor fuel economy
  • •Engine hesitation during acceleration

Diagnostic Steps

  1. 1Scan for error codes using an OBD-II scanner to confirm P0174 and check for any related codes.
  2. 2Inspect the air intake system for any leaks or loose connections, including hoses and the intake manifold.
  3. 3Check the fuel pressure using a fuel pressure gauge to ensure it meets manufacturer specifications.
  4. 4Inspect and clean the Mass Air Flow (MAF) sensor with appropriate MAF cleaner.
  5. 5Examine the fuel injectors for clogs or malfunctions, and perform a resistance check if necessary.
  6. 6Inspect the oxygen sensors for proper operation and any signs of damage.

Solution

Solution

1. Preparation

  • Gather all necessary tools and parts.
  • Disconnect the battery before starting work to avoid electrical shorts.

2. Inspect and Repair Air Intake System

  • Sub-steps:
    1. Remove the engine cover if necessary.
    2. Visually inspect all intake hoses for cracks and secure fittings. Replace any damaged hoses.
    3. Tighten any loose clamps on the air intake system.
  • Tools Required: Socket set, pliers

3. Check and Replace Fuel Filter (if necessary)

  • Sub-steps:
    1. Locate the fuel filter along the fuel line.
    2. Relieve fuel pressure by removing the fuel pump fuse and starting the engine until it stalls.
    3. Disconnect the fuel lines from the filter using appropriate tools.
    4. Replace the old filter with a new one and reconnect the fuel lines securely.
  • Tools Required: Fuel line disconnect tool, wrench set

4. Clean or Replace MAF Sensor

  • Sub-steps:
    1. Locate and disconnect the MAF sensor connector.
    2. Spray MAF cleaner onto the sensor element and let it dry completely.
    3. Reconnect the MAF sensor and ensure the connector is secure.
  • Tools Required: MAF cleaner, screwdriver

5. Inspect and Test Fuel Injectors

  • Sub-steps:
    1. Remove the fuel injector electrical connectors.
    2. Use a multimeter to check the resistance of each injector; it should typically be around 12-16 ohms.
    3. If any injector is outside the recommended range, replace it.
  • Tools Required: Multimeter, injector puller (if needed)

6. Replace Faulty Oxygen Sensors (if applicable)

  • Sub-steps:
    1. Locate the upstream and downstream oxygen sensors on bank 2.
    2. Disconnect the wiring harness from each sensor.
    3. Use an oxygen sensor socket to remove the old sensors.
    4. Install new oxygen sensors and reconnect the wiring harness.
  • Tools Required: Oxygen sensor socket, wrench set

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II scanner
  • •Socket set
  • •Fuel line disconnect tool
  • •Wrench set
  • •Multimeter
  • •MAF cleaner
  • •Oxygen sensor socket

Parts Required

  • •Fuel filter (if necessary)
  • •MAF sensor (if necessary)
  • •Fuel injectors (if necessary)
  • •Oxygen sensors (if necessary)

Additional Information

Error Code
P0174
Affected Component
Engine
Estimated Time
2-4 hours
Difficulty
medium
Severity
high
Tools Required
7 items
Parts Required
4 items

Related Faults

  1. Excessive Engine Oil Consumption

    Some Toyota Corolla E210 models with 2.0L M20A-FKS engine may experience higher than normal oil consumption. This can be related to piston ring design, PCV system, or engine break-in procedures.

    Engine5 symptoms

  2. What causes the Toyota Corolla E210 to vibrate excessively at highway speeds?

    Excessive vibration at highway speeds in a Toyota Corolla E210 (2019-2024) can be caused by several factors. Here’s a detailed guide to diagnose and resolve the issue:

  3. Why is there a burning smell coming from my 2023 Toyota Corolla E210?

    A burning smell emanating from your 2023 Toyota Corolla E210 can be alarming and may indicate several potential issues. Here’s a detailed approach to diagnosing and resolving the problem:

  4. How do I resolve water leakage into the cabin of my Toyota Corolla E210?

    To resolve water leakage into the cabin of your Toyota Corolla E210 (2019-2024), follow these detailed steps. Water leakage can cause unpleasant odors, electrical issues, and interior damage, so it's

  5. What causes the transmission to hesitate when shifting gears in a 2019 Toyota Corolla?

    When a 2019 Toyota Corolla experiences hesitation when shifting gears, it can be attributed to several potential causes. Below is a detailed guide to diagnose and address this issue.

  6. Why is the check engine light on in my 2019 Toyota Corolla E210, and how can I diagnose it?

    Diagnose the check engine light on your 2019 Toyota Corolla E210. Follow our step-by-step guide to identify and resolve issues.

    P0300, P0171, P0420Engine5 symptoms

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation