FAULTBASE
Error CodesASKCars
© 2025 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
Home/Cars/Toyota/Corolla/E210 (2019-2024)/how to address the P0455 code in my Toyota Corolla E210 (2019-2024)?

how to address the P0455 code in my Toyota Corolla E210 (2019-2024)?

Toyota Corolla E210 (2019-2024)

Error Codes
Severity: highDifficulty: mediumError Code: P04552-4 hours
3 min read
541 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix P0455 EVAP system leak in Toyota Corolla E210. Step-by-step guide with diagnostic procedures and repair instructions.

Error Code
P0455
Affected Component
Fuel System
Estimated Time
2-4 hours

Safety Warnings

  • ⚠Disconnect the battery before working on electrical components.
  • ⚠Allow the engine to cool before performing any repairs.

Symptoms

  • •Check engine light illuminated
  • •Fuel odor near the vehicle
  • •Poor fuel economy
  • •Difficulty filling the fuel tank
  • •Increased emissions during testing

Diagnostic Steps

  1. 1Scan for error codes using an OBD-II scanner to confirm P0455 and check for additional codes.
  2. 2Visually inspect the fuel cap for cracks or damage and ensure it is tightened properly.
  3. 3Inspect the EVAP system for visible damage, including hoses, connectors, and the charcoal canister.
  4. 4Perform a smoke test on the EVAP system to identify any leaks.
  5. 5Check the operation of the EVAP purge valve and vent valve using a multimeter.
  6. 6Inspect for any aftermarket modifications that may affect the EVAP system.

Solution

Solution

1. Preparation

  • Gather tools and parts.
  • Disconnect the negative battery terminal.
  • Ensure the vehicle is on a level surface and the engine is cool.

2. Inspect and Replace Fuel Cap

  • Tools Required: None specifically for this step.
  • Check the fuel cap for proper sealing and damage.
  • If damaged, replace the fuel cap with a new one that meets OEM specifications.

3. Inspect EVAP Hoses and Components

  • Tools Required: Basic hand tools (socket set, pliers).
  • Visually inspect all hoses connected to the EVAP system for cracks, wear, or disconnections.
  • Replace any damaged hoses with OEM parts.

4. Smoke Test

  • Tools Required: Smoke machine.
  • Connect the smoke machine to the EVAP system through the service port.
  • Observe for smoke escaping from any component indicating a leak.
  • Repair or replace any leaking components found during the test.

5. Replace EVAP Purge Valve (if necessary)

  • Tools Required: Socket set, screwdriver.
  • Locate the EVAP purge valve (usually near the intake manifold).
  • Disconnect the electrical connector and vacuum lines.
  • Remove the bolts securing the valve and replace it with a new one.
  • Reconnect the vacuum lines and electrical connector.

6. Clear Codes and Test Drive

  • Tools Required: OBD-II scanner.
  • Use the scanner to clear the P0455 code.
  • Test drive the vehicle for at least 20 minutes under various conditions to ensure the code does not reappear.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II scanner
  • •Smoke machine
  • •Basic hand tools (socket set, pliers)

Parts Required

  • •OEM fuel cap (if damaged)
  • •EVAP hoses (if damaged)
  • •EVAP purge valve (if faulty)

Additional Information

Error Code
P0455
Affected Component
Fuel System
Estimated Time
2-4 hours
Difficulty
medium
Severity
high
Tools Required
3 items
Parts Required
3 items

Related Faults

  1. What should I do if my Toyota Corolla E210 has a persistent oil leak?

    If your Toyota Corolla E210 (2019-2024) has a persistent oil leak, follow these detailed steps to diagnose and address the issue:

  2. Why is the Toyota Corolla E210's battery draining quickly without accessories being used?

    If the battery in a Toyota Corolla E210 (2019-2024) is draining quickly without any accessories being used, it could be due to a parasitic draw or a failing battery. Here’s a detailed guide to diagnos

  3. Why is the automatic emergency braking system not working in my 2021 Toyota Corolla E210?

    Diagnose and resolve automatic emergency braking issues in your 2021 Toyota Corolla E210 with this step-by-step guide.

    Brakes3 symptoms

  4. What are the common engine overheating issues in a Toyota Corolla E210?

    Common engine overheating issues in a Toyota Corolla E210 (2019-2024) can arise from several potential causes. Below are the symptoms, diagnostic steps, tools required, potential parts for replacement

  5. What could lead to the steering wheel vibrating at high speeds in a 2021 Toyota Corolla E210?

    Resolve steering wheel vibration in Toyota Corolla E210. Follow our step-by-step guide to diagnose and fix the issue.

    Suspension3 symptoms

  6. How can I fix the issue of my 2022 Toyota Corolla E210's doors not locking properly?

    If the doors of your 2022 Toyota Corolla E210 are not locking properly, follow these detailed steps to diagnose and fix the issue:

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation