why is my Toyota Corolla E170 (2013-2019) shaking when I drive?

Toyota Corolla E170 (2013-2019)

Error Codes

2-4 hours

Time

medium

Difficulty

medium

Severity

3 min read

502 words

Problem Statement

Learn how to diagnose and fix shaking issues in the 2013-2019 Toyota Corolla E170. Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component

Suspension

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Always ensure the vehicle is securely lifted before working underneath.
•Wear safety goggles and gloves when handling tires and suspension components.

Symptoms

•Steering wheel vibrations
•Vehicle shakes at certain speeds
•Unusual noise during acceleration
•Uneven tire wear
•Increased road noise
•Loss of control during braking

Diagnostic Steps

1
Inspect tire condition and pressure, ensuring they are properly inflated and free of damage.
2
Check wheel alignment to see if it is out of specification.
3
Perform a visual inspection of suspension components for wear or damage.
4
Road test the vehicle to determine at what speed the shaking occurs.
5
Scan for error codes using an OBD-II scanner to check for any related engine or transmission issues.
6
Balance the wheels to eliminate vibration caused by unbalanced tires.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Tire pressure gauge
•OBD-II scanner
•Alignment machine
•Jack and jack stands
•Torque wrench

Parts Required

•Replacement tires
•Suspension components
•Wheel balancing weights

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect tire condition and pressure, ensuring they are properly inflated and free of damage.
2
Check wheel alignment to see if it is out of specification.
3
Perform a visual inspection of suspension components for wear or damage.
4
Road test the vehicle to determine at what speed the shaking occurs.
5
Scan for error codes using an OBD-II scanner to check for any related engine or transmission issues.
6
Balance the wheels to eliminate vibration caused by unbalanced tires.

Solution

1. Preparation

Gather all necessary tools and parts.
Ensure the vehicle is on a flat surface and engage the parking brake.
Disconnect the negative terminal of the battery if working on electronic components.

2. Tire Inspection and Replacement

Check Tire Pressure:
- Use a tire pressure gauge to measure each tire's pressure.
- Inflate to the manufacturer’s recommended PSI if necessary.
Inspect Tires:
- Look for any visible damage such as cuts, bulges, or uneven wear.
- Replace any damaged tires with new ones that match the specifications.

3. Wheel Alignment Adjustment

Check Alignment:
- Use an alignment machine or take the vehicle to a professional alignment shop.
- Adjust the alignment settings to meet manufacturer specifications.

4. Suspension Component Inspection

Inspect Suspension:
- Visually inspect struts, shocks, control arms, and bushings for wear or damage.
- Replace any compromised components with OEM or high-quality aftermarket parts.

5. Wheel Balancing

Remove Wheels:
- Loosen lug nuts and safely lift the vehicle using a jack.
- Remove the wheels for balancing.
Balance Wheels:
- Take the wheels to a tire shop and have them balanced.
- Reinstall the wheels and tighten lug nuts to the manufacturer’s torque specifications.