why is my Toyota Corolla E170 (2013-2019) making a hissing noise

Toyota Corolla E170 (2013-2019)

Error Codes

2-4 hours

Time

medium

Difficulty

medium

Severity

3 min read

555 words

Problem Statement

Learn how to diagnose and fix hissing noise in Toyota Corolla E170 (2013-2019). Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component

Engine

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical systems.
•Allow the engine to cool down before opening any components.

Symptoms

•Hissing noise coming from the engine bay or under the vehicle
•Decreased engine performance or power
•Engine overheating
•Increased fuel consumption
•Air conditioning performance issues (if applicable)

Diagnostic Steps

1
Inspect for any visible leaks in vacuum lines or hoses.
2
Use an OBD-II scanner to check for any error codes related to engine performance.
3
Listen for the hissing noise with the engine running from various points near the engine bay.
4
Check the operation of the EGR (Exhaust Gas Recirculation) system and associated components.
5
Inspect the AC system for refrigerant leaks if the noise is present when the AC is on.
6
Examine the intake manifold and throttle body for air leaks.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Vacuum gauge
•Socket set
•Screwdriver set
•AC leak detector
•Manifold gauge set
•Throttle body cleaner
•Cleaning solvent and brush

Parts Required

•Replacement vacuum hoses
•EGR valve gasket (if needed)
•AC refrigerant (if AC system is serviced)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect for any visible leaks in vacuum lines or hoses.
2
Use an OBD-II scanner to check for any error codes related to engine performance.
3
Listen for the hissing noise with the engine running from various points near the engine bay.
4
Check the operation of the EGR (Exhaust Gas Recirculation) system and associated components.
5
Inspect the AC system for refrigerant leaks if the noise is present when the AC is on.
6
Examine the intake manifold and throttle body for air leaks.

Solution

1. Preparation

Gather necessary tools and parts.
Ensure the vehicle is on a flat surface and securely parked.
Disconnect the battery before starting any work.

2. Inspect and Repair Vacuum Leaks

Tools Required: Vacuum gauge, hose clamps, screwdriver set.
Sub-steps:
1. Use a vacuum gauge to check for leaks by connecting it to the intake manifold.
2. If a leak is detected, visually inspect all vacuum lines for cracks or disconnections.
3. Replace any damaged hoses or clamps and ensure all connections are secure.

3. Address EGR System Issues

Tools Required: Socket set, cleaning solvent, brush.
Sub-steps:
1. Locate the EGR valve and remove it using the socket set.
2. Inspect the valve for carbon buildup and clean it with a solvent and brush if necessary.
3. Reinstall the EGR valve, ensuring that it is securely fastened.

4. Check AC System for Leaks

Tools Required: AC leak detector, manifold gauge set.
Sub-steps:
1. With the AC running, use an AC leak detector to identify refrigerant leaks.
2. If a leak is found, repair or replace the faulty components (e.g., compressor, condenser).
3. Recharge the AC system with the correct refrigerant type.

5. Inspect Intake Manifold and Throttle Body

Tools Required: Socket set, throttle body cleaner.
Sub-steps:
1. Remove the intake manifold cover to gain access to the throttle body.
2. Inspect the throttle body for any signs of air leaks or damage.
3. Clean the throttle body with appropriate cleaner and reassemble.