why is my Toyota Corolla E170 (2013-2019) making a grinding noise when I turn

Toyota Corolla E170 (2013-2019)

Error Codes

2-4 hours

Time

medium

Difficulty

medium

Severity

3 min read

496 words

Problem Statement

Learn how to diagnose and fix grinding noise when turning in Toyota Corolla E170 (2013-2019). Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component

Steering

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical systems.
•Allow the vehicle to cool down before working on any components.

Symptoms

•Grinding noise during turns
•Difficulty steering or a feeling of resistance
•Uneven tire wear
•Clunking or popping noises in addition to grinding
•Vibration felt in the steering wheel

Diagnostic Steps

1
Inspect the power steering fluid level and condition.
2
Check for any visible leaks in the power steering system.
3
Examine the condition of the CV joints and boots for damage or wear.
4
Inspect the wheel bearings for play or roughness.
5
Check the suspension components for wear, including struts and bushings.
6
Test drive the vehicle while listening for noise changes during turns.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Socket set
•Torque wrench
•Jack and jack stands
•Screwdrivers
•Bearing press

Parts Required

•Power steering fluid
•CV joints or axle assemblies
•Wheel bearings
•Suspension struts and bushings

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect the power steering fluid level and condition.
2
Check for any visible leaks in the power steering system.
3
Examine the condition of the CV joints and boots for damage or wear.
4
Inspect the wheel bearings for play or roughness.
5
Check the suspension components for wear, including struts and bushings.
6
Test drive the vehicle while listening for noise changes during turns.

Solution

1. Preparation

Gather necessary tools and parts.
Park the vehicle on a level surface and engage the parking brake.
Disconnect the battery if working on electrical components.

2. Inspect and Replace Power Steering Fluid

Locate the power steering reservoir.
Remove the cap and check the fluid level; add manufacturer-recommended fluid if low.
If the fluid is dirty or contaminated, drain the system and refill with new fluid.

3. Check and Replace CV Joints

Lift the front of the vehicle and secure it on jack stands.
Remove the front wheels to access the CV axles.
Inspect the CV joints for tears or damage; if damaged, remove the axle using a socket set.
Install new CV joints or complete axle assemblies, ensuring proper torque specifications for the axle nut.

4. Inspect and Replace Wheel Bearings

Remove the hub assembly to access the wheel bearings.
Check for any roughness or play in the bearings; replace if necessary.
Use a bearing press to install new bearings and ensure proper alignment.

5. Examine and Replace Suspension Components

Inspect struts and bushings for wear and damage.
Replace any worn struts using a socket set and torque to manufacturer specifications.
If bushings are damaged, remove the affected components and install new bushings.