why is my Toyota Corolla E170 (2013-2019) jerking when shifting gears

Toyota Corolla E170 (2013-2019)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

3 min read

528 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix transmission jerking in Toyota Corolla E170 (2013-2019). Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component

Transmission

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical components.
•Allow the engine to cool before inspecting the transmission fluid.

Symptoms

•Jerking sensation when shifting gears
•Delay in acceleration
•Engine stalling during gear changes
•Unusual noises from the transmission
•Poor fuel economy
•Check engine light illuminated

Diagnostic Steps

1
Scan for error codes using an OBD-II scanner to identify any transmission or engine-related faults.
2
Check the transmission fluid level and condition; low or dirty fluid can affect shifting performance.
3
Inspect the engine mounts for wear or damage that could cause movement during gear shifts.
4
Perform a visual inspection of the throttle body and air intake system for obstructions or dirt buildup.
5
Test the functionality of the mass air flow (MAF) sensor using a multimeter or scan tool.
6
Evaluate the condition of the transmission filter and replace if it is clogged or dirty.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Socket set
•Multimeter
•Funnel
•Cleaning supplies

Parts Required

•Transmission fluid
•Transmission filter
•Gasket (if applicable)
•MAF sensor (if replacement is necessary)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Scan for error codes using an OBD-II scanner to identify any transmission or engine-related faults.
2
Check the transmission fluid level and condition; low or dirty fluid can affect shifting performance.
3
Inspect the engine mounts for wear or damage that could cause movement during gear shifts.
4
Perform a visual inspection of the throttle body and air intake system for obstructions or dirt buildup.
5
Test the functionality of the mass air flow (MAF) sensor using a multimeter or scan tool.
6
Evaluate the condition of the transmission filter and replace if it is clogged or dirty.

Solution

1. Preparation

Gather tools: OBD-II scanner, socket set, multimeter, transmission fluid, funnel, and cleaning supplies.
Ensure the vehicle is parked on a level surface and the engine is off before beginning work.

2. Check and Replace Transmission Fluid

Step 1: Locate the transmission dipstick or fill port.
Step 2: Remove the dipstick and wipe it clean; reinsert and remove to check the fluid level.
Step 3: If low, add the manufacturer-recommended transmission fluid through the fill port using a funnel.
Step 4: If the fluid appears dark or smells burnt, proceed to replace the fluid.
Step 5: Drain the transmission fluid by removing the drain plug (if equipped) or the transmission pan.
Step 6: Replace the transmission filter and gasket if necessary.
Step 7: Refill with new transmission fluid to the correct level.

3. Inspect and Replace Faulty Components

Step 1: Inspect the engine mounts for any signs of cracks or excessive wear. Replace if necessary.
Step 2: Clean the throttle body using an approved throttle body cleaner; ensure the butterfly valve operates smoothly.
Step 3: Test the MAF sensor by checking voltage readings; replace if readings are outside the manufacturer's specifications.