FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
why does my Toyota Corolla E170 have a harsh shifting transmission - Toyota Corolla
Home/Cars/Toyota/Corolla/E170 (2013-2019)/why does my Toyota Corolla E170 have a harsh shifting transmission

why does my Toyota Corolla E170 have a harsh shifting transmission

Toyota Corolla E170 (2013-2019)

Error Codes
2-4 hours
Time
medium
Difficulty
high
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
4 min read
605 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix harsh shifting transmission issues in Toyota Corolla E170. Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component
Transmission
Estimated Time
2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Disconnect the battery before working on electrical systems.
  • •Allow the engine to cool before opening the transmission system.

Symptoms

  • •Harsh or abrupt shifting during acceleration or deceleration
  • •Delayed engagement when shifting from park to drive or reverse
  • •Engine RPMs surging during gear shifts
  • •Transmission slipping or failing to engage properly
  • •Unusual noises from the transmission area (e.g., grinding or whining)

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II scanner
  • •Transmission funnel
  • •Fluid pump
  • •Socket set
  • •Torque wrench
  • •Multimeter

Parts Required

  • •Transmission fluid (specific type as per the owner's manual)
  • •Transmission filter (if applicable)
  • •Throttle position sensor (if found faulty)

Additional Information

Affected Component
Transmission
Estimated Time
2-4 hours
Difficulty
medium
Severity
high
Tools Required
6 items
Parts Required
3 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather necessary tools and parts.
  • Ensure the vehicle is parked on a level surface and the engine is off.
  • Disconnect the battery to prevent electrical issues during repair.
2. Check and Replace Transmission Fluid
  • Tools Required: Transmission funnel, fluid pump, socket set, torque wrench.
  • Remove the transmission fluid dipstick (if equipped) to check the fluid level.
  • If the fluid is low, add the recommended type of transmission fluid (check owner’s manual for specifications).
  • If fluid is dirty or burnt, drain the old fluid:
    1. Position a drain pan under the transmission pan.
    2. Remove the transmission pan bolts using a socket set.
    3. Carefully lower the pan and allow the fluid to fully drain.
    4. Replace the transmission filter (if applicable).
    5. Clean the pan and magnet, then reinstall the pan with a new gasket.
    6. Refill with the appropriate transmission fluid using a funnel and fluid pump.
3. Inspect and Replace Throttle Position Sensor
  • Tools Required: Multimeter, socket set.
  • Locate the throttle position sensor on the throttle body.
  • Disconnect the electrical connector.
  • Use a multimeter to check the resistance and voltage output according to specifications.
  • If faulty, remove the old sensor using a socket set and install the new sensor.
  • Reconnect the electrical connector.
4. Check Transmission Control Module (TCM)
  • Tools Required: OBD-II scanner.
  • Connect the OBD-II scanner to the vehicle's diagnostic port.
  • Check for any stored codes related to the TCM.
  • If codes are present, consult repair manuals for troubleshooting procedures specific to the detected codes.
  • If the TCM is malfunctioning, it may need to be reprogrammed or replaced.