why does my Toyota Corolla E170 (2013-2019) vibrate when I brake

Toyota Corolla E170 (2013-2019)

Error Codes

2-4 hours

Time

medium

Difficulty

medium

Severity

3 min read

528 words

Problem Statement

Learn how to diagnose and fix brake vibrations in Toyota Corolla E170 (2013-2019). Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component

Brakes

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is securely lifted and supported before working underneath.
•Allow brake components to cool before handling to avoid burns.

Symptoms

•Vibration felt in the steering wheel when braking
•Pulsation in the brake pedal
•Uneven wear on brake pads or rotors
•Increased stopping distance
•Noise (squeaking or grinding) while braking

Diagnostic Steps

1
Inspect brake rotors for warping using a runout gauge.
2
Check brake pad thickness and condition for uneven wear.
3
Examine suspension components (e.g., control arms, bushings) for looseness or damage.
4
Verify tire balance and condition to rule out related issues.
5
Perform a visual inspection of the wheel bearings for play.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Jack
•Jack stands
•Lug wrench
•Torque wrench
•Runout gauge
•Caliper gauge

Parts Required

•Brake rotors
•Brake pads
•Possibly suspension components (ball joints, bushings)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect brake rotors for warping using a runout gauge.
2
Check brake pad thickness and condition for uneven wear.
3
Examine suspension components (e.g., control arms, bushings) for looseness or damage.
4
Verify tire balance and condition to rule out related issues.
5
Perform a visual inspection of the wheel bearings for play.

Solution

1. Preparation

Tools Required: Jack, jack stands, lug wrench, torque wrench, runout gauge, caliper gauge
Safely park the vehicle on a level surface and engage the parking brake.
Disconnect the negative battery terminal to prevent any electrical shorts.

2. Inspect and Replace Brake Rotors

Sub-steps:
1. Loosen the lug nuts slightly while the vehicle is on the ground.
2. Use a jack to lift the vehicle and secure it with jack stands.
3. Remove the wheels using the lug wrench.
4. Measure rotor thickness and check for warping with a runout gauge.
5. If rotors are warped or below specification, remove the brake caliper and rotor.
6. Install new rotors ensuring they are clean and free of contaminants.
7. Reattach the brake caliper and torque to manufacturer specifications.

3. Inspect and Replace Brake Pads

Sub-steps:
1. While the caliper is removed, inspect the brake pads for wear.
2. Replace pads if they are worn unevenly or below the recommended thickness.
3. Apply brake grease to the back of the pads to reduce noise and improve performance.
4. Reinstall the caliper and torque to specifications.

4. Inspect Suspension Components

Sub-steps:
1. Check control arms, ball joints, and bushings for damage or excessive wear.
2. Replace any worn or damaged components as necessary.
3. Ensure all fasteners are torqued to specifications.

5. Reassemble and Lower Vehicle

Sub-steps:
1. Reinstall the wheels and hand-tighten the lug nuts.
2. Lower the vehicle and torque the lug nuts in a crisscross pattern to manufacturer specifications.
3. Reconnect the negative battery terminal.