why does my Toyota Corolla E170 (2013-2019) transmission slip when accelerating

Toyota Corolla E170 (2013-2019)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

3 min read

586 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix transmission slipping in Toyota Corolla E170 (2013-2019). Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component

Transmission

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical systems.
•Allow the engine to cool before opening the transmission or working on hot components.

Symptoms

•Engine RPM increases without corresponding vehicle speed
•Unusual noises such as whining or grinding during acceleration
•Delayed engagement when shifting from park to drive
•Fluid leaks under the vehicle
•Check engine light illuminated

Diagnostic Steps

1
Scan the vehicle for Diagnostic Trouble Codes (DTCs) using an OBD-II scanner.
2
Check the transmission fluid level and condition (color and smell).
3
Inspect the transmission fluid for contamination (metal shavings or burnt smell).
4
Examine transmission mounts for signs of wear or damage.
5
Test the transmission pressure using a pressure gauge to ensure it meets specifications.
6
Inspect the throttle position sensor (TPS) for proper function.
7
Check for any software updates or recalls related to the transmission control module (TCM).

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Socket set
•Funnel
•Transmission fluid pump
•Torque wrench
•Multimeter
•Gasket scraper

Parts Required

•Toyota ATF WS transmission fluid
•Transmission filter
•Gasket for the transmission pan
•Throttle position sensor (if needed)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Scan the vehicle for Diagnostic Trouble Codes (DTCs) using an OBD-II scanner.
2
Check the transmission fluid level and condition (color and smell).
3
Inspect the transmission fluid for contamination (metal shavings or burnt smell).
4
Examine transmission mounts for signs of wear or damage.
5
Test the transmission pressure using a pressure gauge to ensure it meets specifications.
6
Inspect the throttle position sensor (TPS) for proper function.
7
Check for any software updates or recalls related to the transmission control module (TCM).

Solution

1. Preparation

Gather necessary tools and parts.
Ensure the vehicle is parked on a level surface, and engage the parking brake.
Disconnect the battery to prevent electrical shorts while working on the vehicle.

2. Check and Replace Transmission Fluid

Sub-steps:
- Locate the transmission dipstick (if equipped) or fill port.
- Remove the dipstick and wipe it clean to check fluid level.
- If fluid is low, add the recommended transmission fluid (Toyota ATF WS).
- If fluid is dirty or burnt, proceed to a full fluid change.
Tools Required: Socket set, funnel, transmission fluid pump.

3. Inspect and Replace Transmission Filter

Sub-steps:
- Remove the transmission pan by loosening bolts and carefully prying it off.
- Inspect the filter for clogs and replace it with a new one if necessary.
- Clean the transmission pan and magnet of any debris.
- Reinstall the transmission pan with a new gasket, tightening bolts to manufacturer specifications (usually around 10-12 ft-lbs).
Tools Required: Socket set, gasket scraper, torque wrench.

4. Test and Replace Throttle Position Sensor (if necessary)

Sub-steps:
- Disconnect the electrical connector from the TPS.
- Remove the TPS using a socket or screwdriver.
- Install the new TPS, ensuring it is aligned correctly.
- Reconnect the electrical connector and clear any DTCs.
Tools Required: Socket set, multimeter (for testing).

5. Final Checks

Reconnect the battery.
Start the engine and check for leaks around the transmission pan and filter.
Test drive the vehicle to assess if slipping persists.