why does my Toyota Corolla E170 (2013-2019) smell like gasoline when parked

Toyota Corolla E170 (2013-2019)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

3 min read

541 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix gasoline smell issues in Toyota Corolla E170 (2013-2019). Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component

Fuel System

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on fuel system components.
•Allow the engine to cool before inspecting or repairing fuel lines.

Symptoms

•Gasoline smell around the vehicle, particularly when parked
•Possible fuel stains under the vehicle
•Decreased fuel efficiency
•Engine misfires or rough idling
•Check engine light may be illuminated

Diagnostic Steps

1
Inspect for visible fuel leaks under the vehicle, particularly around the fuel tank, lines, and injectors.
2
Use an OBD-II scanner to check for any diagnostic trouble codes (DTCs) related to the fuel system.
3
Examine the fuel lines and connections for signs of wear, damage, or corrosion.
4
Check the fuel cap for damage or improper sealing.
5
Inspect the EVAP (Evaporative Emission Control) system components, including the charcoal canister and associated hoses.
6
Perform a smoke test on the EVAP system to identify leaks.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Socket set
•Screwdrivers
•Pliers
•Fuel line disconnect tool

Parts Required

•Fuel lines (if damaged)
•Fuel cap (if worn)
•EVAP components (charcoal canister or hoses, if necessary)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect for visible fuel leaks under the vehicle, particularly around the fuel tank, lines, and injectors.
2
Use an OBD-II scanner to check for any diagnostic trouble codes (DTCs) related to the fuel system.
3
Examine the fuel lines and connections for signs of wear, damage, or corrosion.
4
Check the fuel cap for damage or improper sealing.
5
Inspect the EVAP (Evaporative Emission Control) system components, including the charcoal canister and associated hoses.
6
Perform a smoke test on the EVAP system to identify leaks.

Solution

1. Preparation

Gather tools and parts needed for the repair.
Ensure the vehicle is parked on a flat surface and the engine is cool.
Disconnect the battery to prevent any electrical issues during repairs.

2. Inspect and Replace Fuel Lines (if necessary)

Sub-steps:
1. Locate the fuel lines running from the fuel tank to the engine.
2. Use a socket set to remove any retaining clips or fasteners securing the fuel lines.
3. Carefully detach the fuel lines from the connectors, allowing any residual fuel to drain into a container.
4. Inspect the lines for cracks or leaks. If damaged, replace with new fuel lines of the same specification.
5. Reattach the new fuel lines securely, ensuring all connections are tight.

3. Check and Replace Fuel Cap (if necessary)

Sub-steps:
1. Inspect the fuel cap for cracks or worn seals.
2. If damaged, replace the fuel cap with an OEM part to ensure proper sealing.
3. Tighten the fuel cap until it clicks securely.

4. Repair or Replace EVAP Components (if necessary)

Sub-steps:
1. Locate the charcoal canister and inspect for cracks or damage.
2. Check the hoses connected to the canister for wear or leaks.
3. Replace any damaged hoses or the canister as needed, ensuring all connections are secure.
4. Reconnect the battery.