why does my Toyota Corolla E170 (2013-2019) smell like gas when I start it

Toyota Corolla E170 (2013-2019)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

3 min read

551 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix gasoline smell during startup in Toyota Corolla E170 (2013-2019). Step-by-step guide with diagnostic and repair instructions.

Affected Component

Fuel System

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on the fuel system to prevent sparks.
•Allow the engine to cool completely before inspecting fuel components.

Symptoms

•Strong gasoline smell during engine startup
•Engine roughness or hesitation upon starting
•Possible fuel leaks under the vehicle
•Check engine light illuminated (if applicable)
•Decreased fuel efficiency over time

Diagnostic Steps

1
Inspect the fuel lines for visible leaks or cracks.
2
Use an OBD-II scanner to check for trouble codes related to the fuel system.
3
Examine the fuel injectors for signs of leakage or malfunction.
4
Check the fuel pressure using a fuel pressure gauge.
5
Inspect the fuel tank and filler neck for any signs of corrosion or damage.
6
Look for any loose or damaged vacuum hoses that could affect fuel delivery.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Socket set
•Screwdrivers
•Fuel line replacement parts
•Injector puller (if necessary)
•Fuel pressure gauge
•OBD-II scanner

Parts Required

•Fuel line replacement sections
•Fuel injectors (if faulty)
•O-rings for fuel injectors

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect the fuel lines for visible leaks or cracks.
2
Use an OBD-II scanner to check for trouble codes related to the fuel system.
3
Examine the fuel injectors for signs of leakage or malfunction.
4
Check the fuel pressure using a fuel pressure gauge.
5
Inspect the fuel tank and filler neck for any signs of corrosion or damage.
6
Look for any loose or damaged vacuum hoses that could affect fuel delivery.

Solution

1. Preparation

Gather tools and parts required for the repair.
Ensure the vehicle is parked on a flat surface and the engine is cool.
Disconnect the battery to avoid any electrical mishaps.

2. Inspect and Repair Fuel Lines

Sub-steps:
1. Locate the fuel lines under the vehicle and along the engine bay.
2. Use a socket set to remove any covers obstructing access to the fuel lines.
3. Visually inspect the lines for cracks or wet spots indicating leaks.
4. Replace any damaged sections of the fuel line using new hose clamps and appropriate fuel line material.

Tools Required: Socket set, screwdrivers, fuel line replacement parts.

3. Check and Replace Fuel Injectors

Sub-steps:
1. Remove the engine cover if applicable to access the fuel injectors.
2. Disconnect the electrical connectors from each injector.
3. Use a socket to remove the fuel rail and injectors.
4. Inspect the O-rings on each injector for wear or damage and replace them if necessary.
5. Install new or cleaned injectors, ensuring the O-rings are properly seated.

Tools Required: Socket set, injector puller (if necessary), new fuel injectors, O-rings.

4. Fuel Pressure Test

Sub-steps:
1. Locate the fuel pressure test port on the fuel rail.
2. Attach the fuel pressure gauge to the test port.
3. Turn the ignition to the "ON" position without starting the engine and read the pressure.
4. If the pressure is outside the manufacturer's specifications, further investigate the fuel pump and replace as necessary.

Tools Required: Fuel pressure gauge.