why does my Toyota Corolla E170 (2013-2019) smell like gas?

Toyota Corolla E170 (2013-2019)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

3 min read

555 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix gasoline smell issues in Toyota Corolla E170 (2013-2019). Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component

Fuel System

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Always work in a well-ventilated area to avoid inhaling gasoline fumes.
•Disconnect the battery before working on electrical systems or fuel components.

Symptoms

•Strong gasoline smell inside or outside the vehicle
•Fuel odor noticeable during engine operation
•Potential fuel puddles under the vehicle
•Engine misfire or rough running (if fuel is leaking into engine components)
•Check engine light illuminated (in some cases)

Diagnostic Steps

1
Inspect the fuel lines for visible leaks or damage.
2
Check the fuel tank for signs of rust or corrosion.
3
Examine the fuel injectors for leaks around the seals.
4
Use an OBD-II scanner to check for any stored trouble codes related to fuel system issues.
5
Inspect the evaporative emission control system (EVAP) for leaks or malfunctioning components.
6
Check the fuel pressure with a fuel pressure gauge to ensure it’s within specifications.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Socket set
•Fuel pressure gauge
•Safety goggles
•Gloves

Parts Required

•Replacement fuel line sections (if damaged)
•New fuel injector O-rings (if applicable)
•Replacement EVAP hoses (if damaged)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect the fuel lines for visible leaks or damage.
2
Check the fuel tank for signs of rust or corrosion.
3
Examine the fuel injectors for leaks around the seals.
4
Use an OBD-II scanner to check for any stored trouble codes related to fuel system issues.
5
Inspect the evaporative emission control system (EVAP) for leaks or malfunctioning components.
6
Check the fuel pressure with a fuel pressure gauge to ensure it’s within specifications.

Solution

1. Preparation

Tools Required: OBD-II scanner, socket set, fuel pressure gauge, safety goggles, gloves.
Ensure the vehicle is parked on a level surface and the engine is cool.
Disconnect the battery to prevent any electrical sparks.

2. Inspect and Repair Fuel Lines

Sub-steps:
1. Lift the vehicle using a jack and secure it with jack stands.
2. Visually inspect the fuel lines from the fuel tank to the engine for any signs of wear, cracks, or leaks.
3. If a leak is found, replace the damaged section of the fuel line with a new one.
4. Use appropriate clamps to secure connections and ensure no further leaks occur.

3. Check and Repair Fuel Injectors

Sub-steps:
1. Locate the fuel rail and remove the plastic cover (if applicable).
2. Inspect each injector for fuel leakage around the O-rings.
3. If leaking, remove the injector by disconnecting its electrical connector and unscrewing it from the rail.
4. Replace the O-rings and reinstall the injector, ensuring a snug fit.

4. Inspect and Repair EVAP System

Sub-steps:
1. Locate the EVAP canister, usually positioned near the fuel tank.
2. Inspect hoses connected to the canister for cracks or disconnections.
3. Replace any damaged hoses.
4. Use a smoke machine to test the EVAP system for leaks if necessary.

5. Final Checks

Sub-steps:
1. Reconnect the battery.
2. Start the engine and allow it to idle while monitoring for any gasoline smell.
3. Conduct a final visual inspection underneath the vehicle.