why does my Toyota Corolla E170 (2013-2019) shake when I brake

Toyota Corolla E170 (2013-2019)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

3 min read

436 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn to diagnose and fix braking vibrations in Toyota Corolla E170 (2013-2019). Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component

Brakes

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Always disconnect the battery before working on electrical systems.
•Allow the vehicle to cool before working on the braking system.

Symptoms

•Steering wheel shakes or vibrates during braking
•Increased brake pedal pulsation
•Vibration felt in the vehicle body
•Uneven wear on brake pads or rotors
•Possible grinding noise when braking

Diagnostic Steps

1
Inspect brake pads for uneven wear or damage.
2
Check brake rotors for warping using a dial indicator.
3
Examine wheel bearings for play or wear.
4
Verify tire balance and alignment.
5
Inspect suspension components for wear or damage.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Socket set
•Torque wrench
•Dial indicator
•Screwdriver set
•Brake cleaner

Parts Required

•Brake pads
•Brake rotors
•Wheel bearings (if needed)
•Brake fluid (if needed)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

1. Preparation

Gather all necessary tools and parts.
Ensure the vehicle is parked on a flat surface with the parking brake engaged.
Gather safety equipment such as gloves and safety glasses.

2. Inspect Brake Pads

Remove the wheel using a socket set.
Check the brake pads for uneven wear or damage.
Replace any worn or damaged brake pads as needed.

3. Check and Replace Brake Rotors

Use a dial indicator to measure the thickness of the rotors.
If warping is detected (more than 0.002 inches), replace the rotors.
Remove caliper bolts and take off the caliper.
Remove the rotor by unscrewing any retaining screws, if present.
Install new rotors and reassemble the caliper.

4. Inspect Wheel Bearings

With the wheel off, check for play in the wheel bearing by rocking the wheel.
If play is detected, the wheel bearing should be replaced.
Remove the hub assembly and replace the bearing using appropriate tools.

5. Align and Balance Tires

Have the tires balanced and aligned by a professional.
This will ensure even wear and proper handling.