why does my Toyota Corolla E170 (2013-2019) shake when I accelerate

Toyota Corolla E170 (2013-2019)

Error Codes

2-4 hours

Time

medium

Difficulty

medium

Severity

3 min read

415 words

Problem Statement

Discover the causes and solutions for shaking during acceleration in the 2013-2019 Toyota Corolla E170. Step-by-step diagnostic and repair guide.

Affected Component

Suspension

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Always ensure the vehicle is securely supported before working underneath it.
•Disconnect the battery before working on electrical systems.

Symptoms

•Shaking or vibration felt in the steering wheel or seat during acceleration
•Increased noise from the engine or drivetrain
•Poor acceleration response
•Misalignment of the vehicle's wheels
•Uneven tire wear

Diagnostic Steps

1
Inspect the front and rear tires for uneven wear or damage.
2
Check tire pressure and adjust to manufacturer specifications.
3
Perform a visual inspection of the suspension components (control arms, bushings, struts).
4
Inspect the engine mounts for wear or damage.
5
Use a scan tool to check for any stored trouble codes related to the engine or transmission.
6
Conduct a road test to replicate the shaking and determine the speed range at which it occurs.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Jack and jack stands
•Lug wrench
•Torque wrench
•Socket set
•Screwdrivers
•Tire pressure gauge

Parts Required

•Replacement tires (if necessary)
•Engine mount (if damaged)
•Suspension components (if worn)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect the front and rear tires for uneven wear or damage.
2
Check tire pressure and adjust to manufacturer specifications.
3
Perform a visual inspection of the suspension components (control arms, bushings, struts).
4
Inspect the engine mounts for wear or damage.
5
Use a scan tool to check for any stored trouble codes related to the engine or transmission.
6
Conduct a road test to replicate the shaking and determine the speed range at which it occurs.

Solution

1. Preparation

Gather tools and materials.
Park the vehicle on a flat surface and engage the parking brake.
Disconnect the battery if working on electrical components.

2. Tire Inspection and Replacement

Sub-steps:
- Remove the wheel covers or hubcaps if equipped.
- Loosen the lug nuts slightly while the vehicle is still on the ground.
- Jack up the vehicle and secure it with jack stands.
- Remove the wheels and inspect for uneven wear or damage.
- Replace any damaged tires with matching specifications.
- Reinstall wheels and torque lug nuts to manufacturer specifications (typically 76 ft-lbs).

3. Suspension Component Inspection

Sub-steps:
- Inspect control arms and bushings for signs of wear or damage.
- Replace any worn or damaged components.
- Tighten any loose bolts to the manufacturer-recommended torque settings.

4. Engine Mount Inspection

Sub-steps:
- Locate the engine mounts and visually inspect for cracks or wear.
- If damaged, remove the mounting bolts and replace the engine mount.
- Torque the new mount to manufacturer specifications.

5. Wheel Alignment

Sub-steps:
- Take the vehicle to a professional alignment shop.
- Ensure that the alignment is adjusted to the manufacturer's specifications.

Tools Required:

Jack and jack stands
Lug wrench
Torque wrench
Socket set
Screwdrivers
Tire pressure gauge

Parts Required:

Replacement tires (if necessary)
Engine mount (if damaged)
Suspension components (if worn)

Estimated Repair Time: 2-4 hours

Safety Warnings:

Always ensure the vehicle is securely supported before working underneath it.
Disconnect the battery before working on electrical systems.