why does my Toyota Corolla E170 (2013-2019) rev high when I start it

Toyota Corolla E170 (2013-2019)

Error Codes

2-4 hours

Time

medium

Difficulty

medium

Severity

3 min read

486 words

Problem Statement

Learn how to diagnose and fix high engine revs on starting in Toyota Corolla E170 (2013-2019). Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component

Engine

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical systems
•Allow engine to cool before working on components

Symptoms

•Engine revs above normal when starting
•"Check engine" light may illuminate
•Rough idle after starting
•Increased fuel consumption
•Engine stalling after high revs

Diagnostic Steps

1
Scan for error codes using an OBD-II scanner to check for any diagnostic trouble codes (DTCs)
2
Inspect the throttle body for carbon buildup or obstruction
3
Check the air intake system for any leaks or blockages
4
Test the operation of the idle air control valve (IACV) for proper function
5
Inspect the engine coolant temperature sensor for accurate readings
6
Verify the fuel pressure using a fuel pressure gauge

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Throttle body cleaner
•Soft brush
•Socket set
•Multimeter
•Fuel pressure gauge

Parts Required

•Idle air control valve (if needed)
•Coolant temperature sensor (if needed)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Scan for error codes using an OBD-II scanner to check for any diagnostic trouble codes (DTCs)
2
Inspect the throttle body for carbon buildup or obstruction
3
Check the air intake system for any leaks or blockages
4
Test the operation of the idle air control valve (IACV) for proper function
5
Inspect the engine coolant temperature sensor for accurate readings
6
Verify the fuel pressure using a fuel pressure gauge

Solution

1. Preparation

Gather all necessary tools and parts.
Ensure the vehicle is on a flat surface and the parking brake is engaged.
Disconnect the battery to ensure safety.

2. Inspect and Clean Throttle Body

Remove the air intake duct connected to the throttle body.
Use throttle body cleaner and a soft brush to clean the throttle body.
Ensure the throttle plate moves freely without sticking.
Reconnect the air intake duct and secure it.

3. Test and Replace Idle Air Control Valve (if necessary)

Locate the IACV, usually near the throttle body.
Disconnect the electrical connector and remove the IACV using a socket set.
Inspect the IACV for carbon buildup; clean it if possible or replace it if faulty.
Reinstall the IACV and reconnect the electrical connector.

4. Check Coolant Temperature Sensor

Locate the coolant temperature sensor (CTS) which is usually near the thermostat housing.
Disconnect the electrical connector from the CTS.
Use a multimeter to test the resistance of the sensor against manufacturer's specifications.
Replace the CTS if it does not meet specifications.

5. Final Assembly and Battery Reconnection

Reconnect the battery terminals securely.
Start the engine and allow it to reach operating temperature.