FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
why does my Toyota Corolla E170 (2013-2019) power steering make a whining noise - Toyota Corolla
Home/Cars/Toyota/Corolla/E170 (2013-2019)/why does my Toyota Corolla E170 (2013-2019) power steering make a whining noise

why does my Toyota Corolla E170 (2013-2019) power steering make a whining noise

Toyota Corolla E170 (2013-2019)

Error Codes
2-4 hours
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
595 words

Problem Statement

Learn how to diagnose and fix whining noise in power steering of Toyota Corolla E170 (2013-2019). Step-by-step guide with symptoms and solutions.

Affected Component
Steering
Estimated Time
2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Avoid contact with hot engine components.
  • •Disconnect battery before working on electrical systems.
  • •Ensure the vehicle is securely supported when working underneath.

Symptoms

  • •Whining noise when turning the steering wheel
  • •Stiff or unresponsive steering feel
  • •Fluid leak under the vehicle
  • •Steering wheel vibration
  • •Check power steering fluid level warning light illuminated

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II scanner
  • •Socket set
  • •Torque wrench
  • •Belt tension gauge

Parts Required

  • •Power steering fluid
  • •Power steering pump (if needed)
  • •Power steering belt (if needed)

Additional Information

Affected Component
Steering
Estimated Time
2-4 hours
Difficulty
medium
Severity
medium
Tools Required
4 items
Parts Required
3 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather all necessary tools and parts.
  • Ensure the vehicle is parked on a level surface and the engine is off.
2. Inspect and Top Off Power Steering Fluid
  • Sub-steps:
    • Locate the power steering fluid reservoir.
    • Remove the cap and check fluid level; it should be between the "MIN" and "MAX" marks.
    • If low, add the appropriate power steering fluid recommended by the manufacturer.
  • Tools Required: None
  • Safety Warnings: Avoid contact with hot engine components.
3. Check for Leaks
  • Sub-steps:
    • Visually inspect power steering hoses and connections for any signs of leaks.
    • Clean any spilled fluid and monitor for new leaks after running the engine.
  • Tools Required: None
4. Inspect the Power Steering Pump
  • Sub-steps:
    • Locate the power steering pump, typically mounted on the front of the engine.
    • Check for any visible damage or excessive wear on the pump casing.
    • If the pump is noisy or damaged, it may need to be replaced.
  • Tools Required: Socket set, torque wrench
5. Check and Adjust the Power Steering Belt
  • Sub-steps:
    • Locate the power steering belt and check for proper tension.
    • Inspect for cracks or fraying. If damaged, replace the belt.
    • Adjust tension according to the manufacturer's specifications if needed.
  • Tools Required: Socket set, torque wrench, belt tension gauge
6. Replace the Power Steering Pump (if necessary)
  • Sub-steps:
    • Disconnect the battery to prevent electrical issues.
    • Drain power steering fluid from the reservoir.
    • Remove the power steering pump by unbolting it from its mount and disconnecting the hoses.
    • Install the new power steering pump and reconnect hoses.
    • Refill the power steering fluid and bleed the system.
  • Tools Required: Socket set, fluid catch pan, funnel
  • Safety Warnings: Ensure the vehicle is securely supported when working underneath.