why does my Toyota Corolla E170 (2013-2019) make a hissing noise when I accelerate

Toyota Corolla E170 (2013-2019)

Error Codes

2-4 hours

Time

medium

Difficulty

medium

Severity

3 min read

506 words

Problem Statement

Learn how to diagnose and fix the hissing noise during acceleration in Toyota Corolla E170 (2013-2019). Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component

Engine

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect battery before working on electrical systems.
•Allow the engine to cool before performing any inspections or repairs.

Symptoms

•Hissing noise during acceleration
•Decreased engine performance or responsiveness
•Possible rough idle or stalling
•Increased fuel consumption
•Check engine light illuminated

Diagnostic Steps

1
Inspect the intake system for any visible cracks or leaks, particularly in the air intake hose and vacuum lines.
2
Use an OBD-II scanner to check for any stored error codes that may indicate engine or sensor issues.
3
Listen closely under the hood while revving the engine to pinpoint the location of the hissing noise.
4
Check the condition of the PCV (Positive Crankcase Ventilation) valve and related hoses for leaks or blockages.
5
Inspect the throttle body for dirt or carbon buildup that may affect performance.
6
Examine the air filter for any obstructions or damage that could disrupt airflow.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Socket set
•Pliers
•OBD-II scanner
•Throttle body cleaner
•Flashlight

Parts Required

•New air intake hose (if damaged)
•New PCV valve (if faulty)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect the intake system for any visible cracks or leaks, particularly in the air intake hose and vacuum lines.
2
Use an OBD-II scanner to check for any stored error codes that may indicate engine or sensor issues.
3
Listen closely under the hood while revving the engine to pinpoint the location of the hissing noise.
4
Check the condition of the PCV (Positive Crankcase Ventilation) valve and related hoses for leaks or blockages.
5
Inspect the throttle body for dirt or carbon buildup that may affect performance.
6
Examine the air filter for any obstructions or damage that could disrupt airflow.

Solution

1. Preparation

Gather tools and parts needed for the repair.
Disconnect the battery to ensure safety during inspection and repair.
Tools Required: Socket set, pliers, OBD-II scanner, flashlight.

2. Inspect and Replace Damaged Hoses

Remove the air intake hose by loosening the clamps with a socket wrench.
Visually inspect for cracks, tears, or loose connections.
If damage is found, replace the hose with a new one.
- Parts Required: New air intake hose (if damaged).

3. Clean the Throttle Body

Remove the throttle body assembly by disconnecting the electrical connector and loosening the mounting bolts.
Clean the throttle body with throttle body cleaner and a soft cloth to remove carbon buildup.
Reinstall the throttle body and tighten bolts to the manufacturer's torque specification.

4. Check and Replace PCV Valve

Locate the PCV valve and disconnect the hose.
Remove the PCV valve; check for clogs or leaks.
Replace with a new PCV valve if necessary.
- Parts Required: New PCV valve (if faulty).

5. Reconnect and Final Checks

Reconnect the battery.
Start the engine and listen for any persistent hissing noise.
Ensure all connections are tight and there are no further leaks.