why does my Toyota Corolla E170 (2013-2019) make a grinding sound when braking

Toyota Corolla E170 (2013-2019)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

3 min read

522 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn to diagnose and fix grinding noise when braking in Toyota Corolla E170 (2013-2019). Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component

Brakes

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Always disconnect the battery before working on electrical components.
•Allow the brakes to cool before touching any components after driving.

Symptoms

•Grinding noise during braking
•Reduced braking efficiency
•Vibration or pulsation in the brake pedal
•Warning light on the dashboard (if applicable)
•Increased stopping distance

Diagnostic Steps

1
Inspect the brake pads for wear and damage.
2
Check the brake rotors for scoring or warping.
3
Examine the brake calipers for proper operation and any sticking.
4
Look for any debris or foreign objects lodged in the brake assembly.
5
Verify brake fluid level and condition.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Jack and jack stands
•Socket set
•Torque wrench
•Brake cleaner
•Anti-squeal lubricant

Parts Required

•Brake pads (if worn)
•Brake rotors (if damaged)
•Brake caliper (if sticking or damaged)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

1. Preparation

Gather all necessary tools and parts.
Park the vehicle on a flat surface and engage the parking brake.
Wear safety gloves and goggles for protection.

2. Raise the Vehicle

Use a jack to lift the front or rear of the vehicle as needed.
Secure the vehicle with jack stands to ensure stability.

3. Remove Wheel

Using a socket set, remove the lug nuts and take off the wheel.
Keep lug nuts in a safe place for reinstallation.

4. Inspect Brake Components

Brake Pads
- Remove the caliper bolts with a socket wrench.
- Slide the caliper off the rotor and inspect the brake pads for thickness. Replace if the material is less than 3mm.
Brake Rotors
- Check the surface of the rotors for scoring or uneven wear. If damaged, replace the rotors.
Calipers
- Inspect calipers for any signs of sticking or damage. Ensure the caliper piston moves freely. If not, consider rebuilding or replacing the caliper.

5. Clean and Reassemble

Clean the brake components with brake cleaner to remove dust and debris.
Apply anti-squeal lubricant on the back of the brake pads (if necessary).
Reinstall the brake caliper and tighten bolts to manufacturer specifications (typically around 20-25 ft-lbs).
Reinstall the wheel and hand-tighten the lug nuts.

6. Lower Vehicle and Test

Carefully lower the vehicle back to the ground.
Tighten the lug nuts to the manufacturer's torque specifications (usually 76-80 ft-lbs).
Pump the brake pedal a few times to ensure proper brake function before driving.