why does my Toyota Corolla E170 (2013-2019) make a grinding noise when braking

Toyota Corolla E170 (2013-2019)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

3 min read

546 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix grinding noise when braking in a 2013-2019 Toyota Corolla E170. Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component

Brakes

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical components.
•Allow the vehicle to cool before working on the braking system to avoid burns.

Symptoms

•Grinding noise when applying brakes
•Vibration felt in the brake pedal
•Decreased braking performance
•Brake warning light illuminated
•Visual wear on brake pads when inspected

Diagnostic Steps

1
Inspect brake pads for wear and thickness.
2
Check brake rotors for scoring or warping.
3
Examine brake calipers for proper operation and any seized components.
4
Inspect brake fluid level and condition.
5
Listen for noise while performing a stationary brake test.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Jack and jack stands
•Lug wrench
•Socket set
•Torque wrench
•Brake cleaner
•Safety goggles
•Gloves

Parts Required

•New brake pads
•New brake rotors (if needed)
•Brake caliper (if needed)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

1. Preparation

Tools Required: Jack and jack stands, lug wrench, socket set, torque wrench, brake cleaner, safety goggles, gloves
Park the vehicle on a level surface, engage the parking brake, and disconnect the battery.
Allow the vehicle to cool down if recently driven.

2. Lift the Vehicle and Remove Wheel

Use the lug wrench to loosen the lug nuts while the vehicle is on the ground.
Lift the vehicle using a jack and secure it with jack stands.
Remove the lug nuts and take off the wheel to access the braking components.

3. Inspect Brake Components

Check the brake pads:
- If they are worn down to the indicator or below the minimum thickness, replace the pads.
Inspect the brake rotors:
- Look for deep grooves or scoring. If damaged, they should be resurfaced or replaced.
Examine the brake calipers:
- Ensure that they are not seized and are functioning properly. If malfunctioning, replace them.

4. Replace Brake Pads and/or Rotors

Brake Pad Replacement:
- Remove the caliper bolts using a socket set.
- Slide the caliper off the brake pad and bracket, and remove the old pads.
- Install new brake pads, ensuring they are properly seated.
Rotor Replacement (if necessary):
- Remove the rotor retaining screws and slide off the rotor.
- Install the new rotor and secure it with retaining screws.

5. Reassemble and Test

Reinstall the caliper over the new pads and secure it with the caliper bolts.
Reattach the wheel and hand-tighten the lug nuts.
Lower the vehicle and torque the lug nuts to the manufacturer’s specifications.
Reconnect the battery and pump the brake pedal to seat the pads.