why does my Toyota Corolla E170 (2013-2019) make a grinding noise when braking?

Toyota Corolla E170 (2013-2019)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

3 min read

548 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn to diagnose and fix grinding noise when braking in a 2013-2019 Toyota Corolla E170. Step-by-step guide with symptoms and solutions.

Affected Component

Brakes

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Always wear safety glasses and gloves when working on the brake system.
•Allow the brake components to cool before handling to avoid burns.

Symptoms

•Grinding noise during braking
•Vibration felt through the brake pedal
•Reduced braking efficiency or responsiveness
•Possible illumination of the brake warning light
•Uneven wear on brake pads or rotors

Diagnostic Steps

1
Inspect brake pads for wear and damage.
2
Check brake rotors for scoring or warping.
3
Examine brake calipers for proper function and alignment.
4
Inspect brake fluid level and condition.
5
Use an OBD-II scanner to check for any related error codes.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Jack
•Jack stands
•Lug wrench
•Socket set
•Brake pad spreader
•Torque wrench
•Brake rotor puller

Parts Required

•Brake pads
•Brake rotors (if necessary)
•Brake fluid (if needed)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

1. Preparation

Gather necessary tools and parts.
Ensure the vehicle is parked on a flat surface and engage the parking brake.
Disconnect the battery for safety.

2. Remove Wheel

Tools Required: Jack, jack stands, lug wrench.
Sub-steps:
1. Loosen the lug nuts slightly before lifting the vehicle.
2. Use the jack to lift the vehicle and secure it on jack stands.
3. Remove the lug nuts and take off the wheel.

3. Inspect and Replace Brake Pads

Tools Required: Socket set, brake pad spreader, torque wrench.
Sub-steps:
1. Remove the caliper bolts using the socket set.
2. Carefully lift the caliper off the rotor and support it with a bungee cord (do not let it hang).
3. Inspect the brake pads; if they are worn below the minimum thickness, replace them.
4. If replacing, compress the caliper piston using the brake pad spreader to allow space for new pads.
5. Install new brake pads into the caliper bracket.

4. Inspect and Replace Brake Rotors (if necessary)

Tools Required: Brake rotor puller, torque wrench.
Sub-steps:
1. Check the rotor surface for grooves or uneven wear; replace if necessary.
2. If replacing, remove the old rotor by using a rotor puller.
3. Clean the hub surface and install the new rotor, ensuring it is seated correctly.
4. Torque the rotor screws to the manufacturer's specifications.

5. Reassemble and Test

Tools Required: Torque wrench, lug wrench.
Sub-steps:
1. Reinstall the caliper over the new brake pads and secure it with caliper bolts.
2. Reinstall the wheel and hand-tighten the lug nuts.
3. Lower the vehicle and then torque the lug nuts to the specified value.
4. Reconnect the battery.