why does my Toyota Corolla E170 (2013-2019) make a clicking noise when driving?

Toyota Corolla E170 (2013-2019)

Error Codes

2-4 hours

Time

medium

Difficulty

medium

Severity

3 min read

499 words

Problem Statement

Diagnose and fix clicking noise in Toyota Corolla E170 (2013-2019). Follow our step-by-step guide for symptoms, diagnostics, and repair solutions.

Affected Component

Suspension

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Always use jack stands when working under the vehicle.
•Ensure the vehicle is securely parked and the engine is off before beginning any repairs.

Symptoms

•Clicking noise that increases with vehicle speed
•Noise occurs during acceleration or turning
•Vibration felt through the steering wheel or floorboard
•Uneven tire wear may be evident
•Possible loss of power during acceleration

Diagnostic Steps

1
Inspect the tires for any foreign objects or damage.
2
Check for any visible signs of wear or damage on CV joints and axles.
3
Lift the vehicle and spin the wheels to listen for noises from the wheel bearings.
4
Examine suspension components for looseness or wear.
5
Test drive the vehicle to replicate the noise and determine under what conditions it occurs.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Lug wrench
•Tire pressure gauge
•Socket set
•Torque wrench
•Bearing puller

Parts Required

•Replacement CV joints or axles (if damaged)
•Wheel bearings (if worn)
•Tires (if damaged)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect the tires for any foreign objects or damage.
2
Check for any visible signs of wear or damage on CV joints and axles.
3
Lift the vehicle and spin the wheels to listen for noises from the wheel bearings.
4
Examine suspension components for looseness or wear.
5
Test drive the vehicle to replicate the noise and determine under what conditions it occurs.

Solution

1. Preparation

Gather necessary tools and parts.
Ensure the vehicle is on a flat surface and engage the parking brake.
Disconnect the battery if working on electrical components.

2. Inspect Tire Condition

Sub-steps:
1. Remove the wheel covers if applicable.
2. Inspect the tires for visible punctures, stones, or irregular wear patterns.
3. Replace any damaged tires if necessary.
Tools Required: Lug wrench, tire pressure gauge.

3. Check CV Joints and Axles

Sub-steps:
1. Raise the vehicle using a jack and secure it with jack stands.
2. Examine the rubber boots of the CV joints for cracks or leaks.
3. Grip the CV joint and check for play. If excessive movement is detected, replace the CV joint or axle.
Tools Required: Socket set, torque wrench.

4. Inspect Wheel Bearings

Sub-steps:
1. Spin the wheel by hand and listen for any grinding or clicking noises.
2. If noise is present, remove the wheel and inspect the wheel bearing for wear.
3. Replace the wheel bearing if necessary.
Tools Required: Bearing puller, socket set.

5. Examine Suspension Components

Sub-steps:
1. Check all suspension components such as control arms, bushings, and struts for wear.
2. Replace any worn or damaged parts to ensure stability and reduce noise.
Tools Required: Wrench set, torque wrench.