FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
why does my Toyota Corolla E170 (2013-2019) lose power when accelerating - Toyota Corolla
Home/Cars/Toyota/Corolla/E170 (2013-2019)/why does my Toyota Corolla E170 (2013-2019) lose power when accelerating

why does my Toyota Corolla E170 (2013-2019) lose power when accelerating

Toyota Corolla E170 (2013-2019)

Error Codes
2-4 hours
Time
medium
Difficulty
high
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
600 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix power loss during acceleration in the 2013-2019 Toyota Corolla E170. Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component
Engine
Estimated Time
2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Disconnect the battery before working on electrical systems
  • •Allow the engine to cool before opening any components

Symptoms

  • •Check engine light illuminated
  • •Engine hesitates or stutters during acceleration
  • •Poor fuel economy
  • •Increased engine RPMs without corresponding acceleration
  • •Unusual noises from the engine or exhaust
  • •Engine stalling during acceleration

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II scanner
  • •Fuel pressure gauge
  • •Throttle body cleaner
  • •Socket set
  • •Torque wrench
  • •Spark plug socket

Parts Required

  • •Fuel filter
  • •Throttle body gasket (if applicable)
  • •Spark plugs
  • •Cleaning supplies (throttle body cleaner, cloths)

Additional Information

Affected Component
Engine
Estimated Time
2-4 hours
Difficulty
medium
Severity
high
Tools Required
6 items
Parts Required
4 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather necessary tools and materials.
  • Ensure the vehicle is parked on a level surface and the engine is cool.
  • Disconnect the negative terminal of the battery for safety.
2. Address Fuel System Issues

  1. Check Fuel Pressure:

    • Connect a fuel pressure gauge to the fuel rail.
    • Turn the ignition key to the "ON" position (do not start the engine) and check the pressure reading. It should align with the manufacturer’s specifications (typically around 43-50 psi).
    • If low, inspect the fuel pump and fuel filter for blockages or failures.

  2. Replace Fuel Filter (if necessary):

    • Locate the fuel filter (if external) and relieve fuel pressure.
    • Disconnect the fuel lines from both ends of the filter.
    • Install the new fuel filter in the correct orientation and reconnect the fuel lines.
3. Clean or Replace Throttle Body

  1. Remove Throttle Body:

    • Disconnect the electrical connector and vacuum lines.
    • Unbolt the throttle body from the intake manifold.

  2. Clean Throttle Body:

    • Use throttle body cleaner and a soft cloth to remove carbon buildup.
    • Ensure the throttle plate moves freely.

  3. Reinstall Throttle Body:

    • Reattach the throttle body to the intake manifold and reconnect all lines and connectors.
4. Inspect and Replace Spark Plugs

  1. Remove Ignition Coils:

    • Unbolt and disconnect the ignition coils from the spark plugs.

  2. Replace Spark Plugs:

    • Use a spark plug socket to remove old spark plugs.
    • Check gap specifications and install new plugs. Tighten to manufacturer specifications (usually around 13-16 ft-lbs).

  3. Reinstall Ignition Coils:

    • Reattach the ignition coils and secure with bolts.
5. Reconnect Battery and Test
  • Reconnect the negative battery terminal.
  • Start the engine and check for any error codes or warning lights.