why does my Toyota Corolla E170 (2013-2019) have a strong smell of gasoline

Toyota Corolla E170 (2013-2019)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

3 min read

562 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix a strong gasoline smell in your 2013-2019 Toyota Corolla E170. Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component

Fuel System

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on fuel systems.
•Work in a well-ventilated area to avoid inhaling gasoline fumes.

Symptoms

•Strong gasoline odor, especially around the vehicle
•Possible fuel leak visible under the car
•Check engine light may be illuminated
•Reduced fuel efficiency
•Engine stalling or rough idle in severe cases

Diagnostic Steps

1
Inspect the fuel lines for any visible signs of wear, cracks, or leaks.
2
Check the fuel injector seals for leaks using a visual inspection and by feeling for wetness around the injectors.
3
Use an OBD-II scanner to check for any related error codes, particularly those related to the EVAP system.
4
Inspect the fuel tank for signs of corrosion or damage.
5
Check the fuel cap for proper sealing and any signs of wear or damage.
6
Perform a smoke test on the EVAP system to identify any leaks.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Socket set
•Wrench set
•Fuel injector puller
•Torque wrench

Parts Required

•New fuel lines (if damaged)
•Fuel injectors (if leaking)
•New fuel cap (if damaged)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect the fuel lines for any visible signs of wear, cracks, or leaks.
2
Check the fuel injector seals for leaks using a visual inspection and by feeling for wetness around the injectors.
3
Use an OBD-II scanner to check for any related error codes, particularly those related to the EVAP system.
4
Inspect the fuel tank for signs of corrosion or damage.
5
Check the fuel cap for proper sealing and any signs of wear or damage.
6
Perform a smoke test on the EVAP system to identify any leaks.

Solution

1. Preparation

Gather necessary tools and parts.
Ensure the vehicle is parked on a flat surface and the engine is cool.
Disconnect the battery to prevent any electrical issues.

2. Inspect and Replace Fuel Lines

Tools Required: Socket set, wrench set
Sub-steps:
1. Locate the fuel lines running from the fuel tank to the engine bay.
2. Use the socket set to remove any brackets securing the fuel lines.
3. Inspect each line for cracks or leaks and replace any damaged sections with new fuel lines.
4. Re-secure the lines and ensure all connections are tight.

3. Check and Replace Fuel Injectors

Tools Required: Fuel injector puller, torque wrench
Sub-steps:
1. Remove the engine cover if applicable to access the fuel injectors.
2. Disconnect the electrical connectors from the fuel injectors.
3. Remove any retaining clips and unbolt the fuel rail as necessary.
4. Replace any failing injectors and ensure new seals are used during installation.
5. Reassemble the fuel rail and reconnect electrical connectors, ensuring everything is torqued to manufacturer specifications.

4. Inspect and Replace Fuel Cap

Sub-steps:
1. Visually inspect the fuel cap for cracks or a damaged seal.
2. If damaged, replace the fuel cap with an OEM part to ensure proper sealing.

5. Repair EVAP System (if necessary)

Sub-steps:
1. If a leak is detected in the EVAP system, replace damaged hoses or components.
2. Ensure all connections are secure and the system is properly sealed.