why does my Toyota Corolla E170 (2013-2019) feel like it’s losing traction

Toyota Corolla E170 (2013-2019)

Error Codes

2-4 hours

Time

medium

Difficulty

medium

Severity

3 min read

510 words

Problem Statement

Discover how to diagnose and fix traction loss in Toyota Corolla E170 (2013-2019). Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component

Suspension

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Always wear appropriate safety gear (gloves, goggles).
•Ensure the vehicle is securely lifted and supported before working under it.

Symptoms

•Slipping or skidding during acceleration
•Warning light illuminated on the dashboard (e.g., traction control light)
•Uneven tire wear or bald spots on tires
•Vibration or noise from tires or suspension
•Difficulty maintaining control on wet or slippery surfaces

Diagnostic Steps

1
Inspect tire tread depth and pressure on all four tires.
2
Scan the vehicle’s onboard diagnostics using an OBD-II scanner for any error codes related to traction control or ABS.
3
Visually examine suspension components (e.g., struts, shocks) for signs of damage or wear.
4
Check for proper function of the traction control system by performing a manual test (e.g., accelerating on a slippery surface).
5
Inspect wheel alignment and balance, noting any uneven wear patterns on tires.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Jack
•Jack stands
•Tire depth gauge
•Lug wrench
•Socket set
•Torque wrench
•OBD-II scanner
•Diagnostic service manual

Parts Required

•Replacement tires (if needed)
•Suspension components (struts, shocks, control arms)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect tire tread depth and pressure on all four tires.
2
Scan the vehicle’s onboard diagnostics using an OBD-II scanner for any error codes related to traction control or ABS.
3
Visually examine suspension components (e.g., struts, shocks) for signs of damage or wear.
4
Check for proper function of the traction control system by performing a manual test (e.g., accelerating on a slippery surface).
5
Inspect wheel alignment and balance, noting any uneven wear patterns on tires.

Solution

1. Preparation

Gather necessary tools and parts.
Park the vehicle on a level surface and engage the parking brake.
Disconnect the battery (if applicable for electrical repairs).

2. Tire Inspection and Replacement

Sub-steps:
1. Remove wheel covers and loosen lug nuts on affected tires.
2. Lift the vehicle using a jack and secure it with jack stands.
3. Remove the tires and measure tread depth using a tread depth gauge; replace tires if tread is below 2/32 inches.
Tools Required: Jack, jack stands, tire depth gauge, lug wrench.

3. Suspension Component Repair

Sub-steps:
1. Inspect struts and shocks for leaks or damage; replace if necessary.
2. Check control arms and bushings for wear; replace any damaged components.
3. Reassemble suspension components and tighten bolts to manufacturer specifications (consult repair manual for torque values).
Tools Required: Socket set, torque wrench, pry bar.

4. Traction Control System Check

Sub-steps:
1. Reconnect the battery and use the OBD-II scanner to clear any error codes.
2. Test the traction control system by driving on a loose surface; ensure the system engages and disengages properly.
3. If issues persist, consult service manual for specific diagnostic procedures for the traction control system.
Tools Required: OBD-II scanner, diagnostic service manual.