why does my Toyota Corolla E170 (2013-2019) exhaust smell like gasoline

Toyota Corolla E170 (2013-2019)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

3 min read

562 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix gasoline smell from exhaust in Toyota Corolla E170. Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component

Fuel System

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical systems.
•Allow engine to cool before opening any components related to the fuel system.

Symptoms

•Strong gasoline odor from the exhaust
•Decreased fuel economy
•Rough idle or engine stalling
•Engine misfires or hesitation during acceleration
•Check engine light illuminated

Diagnostic Steps

1
Scan for error codes using an OBD-II scanner to identify any related trouble codes.
2
Inspect the fuel injectors for leaks or malfunctioning components.
3
Check the fuel pressure using a fuel pressure gauge to ensure it falls within the manufacturer's specifications.
4
Examine the air-fuel mixture by inspecting the mass airflow sensor (MAF) for dirt or malfunction.
5
Inspect the exhaust system for any signs of unburned fuel or backpressure issues.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Fuel pressure gauge
•Socket set
•Torque wrench
•Fuel injector removal tool
•MAF sensor cleaner

Parts Required

•New fuel injectors (if defective)
•Fuel filter (if applicable)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Scan for error codes using an OBD-II scanner to identify any related trouble codes.
2
Inspect the fuel injectors for leaks or malfunctioning components.
3
Check the fuel pressure using a fuel pressure gauge to ensure it falls within the manufacturer's specifications.
4
Examine the air-fuel mixture by inspecting the mass airflow sensor (MAF) for dirt or malfunction.
5
Inspect the exhaust system for any signs of unburned fuel or backpressure issues.

Solution

1. Preparation

Gather necessary tools and parts.
Disconnect the battery to ensure safety during repairs.
Allow the engine to cool before starting work.

2. Inspect and Replace Fuel Injectors

Tools Required: Socket set, torque wrench, fuel injector removal tool.
Sub-steps:
1. Remove the engine cover if present.
2. Depressurize the fuel system by removing the fuel pump fuse and running the engine until it stalls.
3. Disconnect the fuel lines from the fuel rail using the fuel injector removal tool.
4. Unplug the electrical connectors from each fuel injector.
5. Remove the retaining clips and extract the fuel injectors from the rail.
6. Inspect the old injectors for damage or clogging. Replace with new injectors if necessary, ensuring they are seated correctly.
7. Reinstall the fuel rail and reconnect fuel lines and electrical connectors.

3. Check and Clean MAF Sensor

Tools Required: MAF sensor cleaner, small screwdriver.
Sub-steps:
1. Locate the MAF sensor in the intake system.
2. Disconnect the electrical connector and remove the sensor from its housing.
3. Spray MAF sensor cleaner on the sensor to remove dirt and deposits. Allow it to dry completely.
4. Reinstall the sensor and reconnect the electrical connector.

4. Test Fuel Pressure

Tools Required: Fuel pressure gauge.
Sub-steps:
1. Connect the fuel pressure gauge to the fuel rail.
2. Turn the ignition to the "ON" position (do not start the engine) to check the pressure reading.
3. Compare the reading to the specifications in the service manual. If the pressure is too high or too low, investigate the fuel pump or pressure regulator for issues.