why does my Toyota Corolla E170 (2013-2019) engine shake when I stop?

Toyota Corolla E170 (2013-2019)

Error Codes

2-4 hours

Time

medium

Difficulty

medium

Severity

3 min read

492 words

Problem Statement

Learn how to diagnose and fix engine shaking in Toyota Corolla E170 (2013-2019). Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component

Engine

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical systems.
•Ensure the engine is cool before starting repairs.

Symptoms

•Engine vibrations felt through the steering wheel and chassis
•Rough idle when stopped
•Possible check engine light illumination
•Increased noise from the engine compartment
•Shaking felt in the cabin

Diagnostic Steps

1
Scan for error codes using an OBD-II scanner to check for any related trouble codes.
2
Inspect engine mounts visually for cracks, wear, or damage.
3
Check the idle speed with a diagnostic tool to ensure it’s within manufacturer specifications.
4
Inspect vacuum hoses for leaks that could affect engine performance.
5
Check for fuel delivery issues by inspecting the fuel filter and pump function.
6
Test the throttle body for proper operation and cleanliness.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Socket set
•Torque wrench
•Pry bar
•Jack stands
•Throttle body cleaner
•Screwdriver

Parts Required

•Engine mounts (if damaged)
•Throttle body cleaner (if applicable)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Scan for error codes using an OBD-II scanner to check for any related trouble codes.
2
Inspect engine mounts visually for cracks, wear, or damage.
3
Check the idle speed with a diagnostic tool to ensure it’s within manufacturer specifications.
4
Inspect vacuum hoses for leaks that could affect engine performance.
5
Check for fuel delivery issues by inspecting the fuel filter and pump function.
6
Test the throttle body for proper operation and cleanliness.

Solution

1. Preparation

Gather necessary tools and parts before starting the repair.
Ensure the vehicle is parked on a flat surface and the engine is off.
Disconnect the battery to prevent any electrical issues.

2. Inspect and Replace Engine Mounts

Tools Required: Socket set, torque wrench, pry bar, jack stands
Sub-steps:
1. Using a jack, support the engine slightly to relieve pressure on the engine mounts.
2. Remove the bolts from the damaged engine mount using the socket set.
3. Carefully remove the old mount and inspect the area for any additional damage.
4. Clean the mounting surfaces to ensure a proper fit for the new mount.
5. Install the new engine mount and torque the bolts to the manufacturer's specifications (typically around 50-70 ft-lbs).
6. Remove the jack and allow the engine to settle onto the new mount.

3. Clean Throttle Body (if necessary)

Tools Required: Throttle body cleaner, shop towels, screwdriver
Sub-steps:
1. Remove the air intake duct from the throttle body.
2. Spray throttle body cleaner onto a shop towel and wipe the interior of the throttle body.
3. Ensure the throttle plate moves freely and is clean from deposits.
4. Reattach the air intake duct securely.