why does my Toyota Corolla E170 (2013-2019) check engine light come on after gas fill-up

Toyota Corolla E170 (2013-2019)

Error Codes

1-3 hours

Time

medium

Difficulty

medium

Severity

3 min read

567 words

Problem Statement

Learn how to diagnose and fix the check engine light issue after refueling in a 2013-2019 Toyota Corolla E170. Step-by-step guide included.

Affected Component

Fuel System

Estimated Time

1-3 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical components.
•Work in a well-ventilated area when dealing with fuel systems to avoid inhalation of fumes.

Symptoms

•Check engine light illuminated
•Fuel odor around the vehicle
•Engine stalling during or after refueling
•Poor fuel economy
•Difficulty starting the engine after refueling

Diagnostic Steps

1
Scan for error codes using an OBD-II scanner to retrieve trouble codes that can provide insight into the issue.
2
Inspect the gas cap for proper sealing and any damage or wear that may cause evaporation leaks.
3
Check for leaks in the evaporative emissions system, including hoses and connections.
4
Test the fuel vapor pressure sensor for proper functionality.
5
Verify the integrity of the charcoal canister for cracks or blockages.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Multimeter
•Socket set
•Screwdrivers

Parts Required

•New gas cap (if damaged)
•Evaporative emissions hoses (if cracked)
•Fuel vapor pressure sensor (if faulty)
•Charcoal canister (if damaged)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Scan for error codes using an OBD-II scanner to retrieve trouble codes that can provide insight into the issue.
2
Inspect the gas cap for proper sealing and any damage or wear that may cause evaporation leaks.
3
Check for leaks in the evaporative emissions system, including hoses and connections.
4
Test the fuel vapor pressure sensor for proper functionality.
5
Verify the integrity of the charcoal canister for cracks or blockages.

Solution

1. Preparation

Gather tools and parts required for the repair.
Ensure the vehicle is parked on a flat surface and the engine is off.
Disconnect the negative battery terminal to reset the system and ensure safety.

2. Inspect and Replace Gas Cap

Tools Required: None specifically, but a socket set may be useful.
Remove the gas cap and inspect for cracks, damaged threads, or rubber seal wear.
If damaged, replace the gas cap with a new OEM or equivalent part.
Reinstall the gas cap and ensure it clicks securely.

3. Check Evaporative Emission System

Tools Required: OBD-II scanner, multimeter.
Inspect the evaporative emissions hoses for cracks or disconnections.
If hoses are damaged, replace them with new hoses compatible with the Toyota Corolla.
Use the multimeter to test the fuel vapor pressure sensor.
- Disconnect the sensor and check the resistance. Consult the service manual for expected values.
- If the sensor is out of specification, replace it.

4. Inspect and Replace Charcoal Canister

Tools Required: Socket set, screwdrivers.
Locate the charcoal canister; it is usually found under the vehicle near the fuel tank.
Inspect for physical damage or cracks.
If damage is present, remove the canister by unbolting it and disconnecting the hoses.
Install a new charcoal canister and reconnect the hoses securely.

5. Reset Check Engine Light

Reconnect the negative battery terminal.
Start the engine and allow it to run for a few minutes.
Use the OBD-II scanner to clear any stored trouble codes.