why does my ABS light stay on in my Toyota Corolla E170 (2013-2019)

Toyota Corolla E170 (2013-2019)

Error Codes

1-2 hours

Time

medium

Difficulty

high

Severity

3 min read

554 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix the ABS light issue in Toyota Corolla E170 (2013-2019). Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component

Brakes

Estimated Time

1-2 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical systems.
•Allow the vehicle to cool down if the engine has been running before performing repairs.

Symptoms

•ABS warning light illuminated on the dashboard
•Loss of ABS functionality during braking
•Unresponsive or spongy brake pedal feel
•Increased stopping distance in emergencies
•Warning messages displayed on the dashboard (if applicable)

Diagnostic Steps

1
Scan the vehicle's onboard diagnostics system using an OBD-II scanner to retrieve any error codes.
2
Inspect the ABS fuse to ensure it is not blown.
3
Check the wheel speed sensors for damage or disconnection.
4
Examine the ABS control module for any visible signs of damage or corrosion.
5
Inspect the brake fluid level and ensure it is within the recommended range.
6
Test the ABS pump operation by observing its activity during a self-test (if applicable).

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Socket set
•Screwdrivers
•Jack and jack stands

Parts Required

•ABS fuse (if blown)
•Wheel speed sensors (if damaged)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Scan the vehicle's onboard diagnostics system using an OBD-II scanner to retrieve any error codes.
2
Inspect the ABS fuse to ensure it is not blown.
3
Check the wheel speed sensors for damage or disconnection.
4
Examine the ABS control module for any visible signs of damage or corrosion.
5
Inspect the brake fluid level and ensure it is within the recommended range.
6
Test the ABS pump operation by observing its activity during a self-test (if applicable).

Solution

1. Preparation

Gather the necessary tools and parts.
Ensure the vehicle is parked on a level surface, and the engine is off.
Disconnect the battery to prevent electrical shorts during repairs.

2. Check ABS Fuse

Locate the fuse box, typically found under the dashboard or in the engine compartment.
Remove the cover and identify the ABS fuse using the diagram on the cover.
Inspect the fuse: if blown, replace it with a new fuse of the same amperage.

3. Inspect Wheel Speed Sensors

Raise the vehicle using a jack and secure it with jack stands.
Remove the wheels to access the wheel speed sensors.
Visually inspect each sensor for damage, misalignment, or disconnection.
Clean any dirt or debris from the sensor and its connector.
Reconnect any loose connections, ensuring a snug fit.

4. Check ABS Control Module

Locate the ABS control module, typically found near the brake master cylinder.
Inspect the module for physical damage, corrosion, or loose connections.
If damaged, the module may need to be replaced or reprogrammed.

5. Verify Brake Fluid Level

Open the hood and locate the brake fluid reservoir.
Check the fluid level against the minimum and maximum indicators.
If low, top up with the recommended brake fluid type (DOT 3 or DOT 4).

6. Reconnect Battery and Test

Reconnect the battery terminals securely.
Start the vehicle and observe if the ABS light remains illuminated.
Perform a test drive to ensure the ABS system is functioning correctly.