what does it mean when my Toyota Corolla E170 (2013-2019) has a C1553 code

Toyota Corolla E170 (2013-2019)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

Error Code: C1553

3 min read

551 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix C1553 ABS malfunction in Toyota Corolla E170 (2013-2019). Step-by-step guide with diagnostic procedures and repair instructions.

Error Code

C1553

Affected Component

Brakes

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical systems to prevent shorts.
•Ensure the vehicle is securely lifted if working under it.

Symptoms

•Check engine light illuminated
•ABS warning light activated
•Traction control light illuminated
•Unusual braking behavior (e.g., pulsating brakes)
•Lack of ABS functionality during braking
•Poor traction control performance

Diagnostic Steps

1
Scan for error codes using an OBD-II scanner to confirm C1553 and check for any other related codes.
2
Inspect the ABS wheel speed sensors visually for damage, dirt, or disconnections.
3
Check the wiring and connectors leading to the ABS module for any signs of wear or corrosion.
4
Inspect the ABS control module for any fault signs or physical damage.
5
Test the ABS system operation by conducting a road test to assess the functionality of ABS and traction control during braking.
6
Measure the resistance and voltage of the wheel speed sensors using a multimeter to ensure they are within specifications.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Multimeter
•Brake cleaner
•Socket set
•Torque wrench

Parts Required

•ABS wheel speed sensor (if faulty)
•Wiring harness (if damaged)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Scan for error codes using an OBD-II scanner to confirm C1553 and check for any other related codes.
2
Inspect the ABS wheel speed sensors visually for damage, dirt, or disconnections.
3
Check the wiring and connectors leading to the ABS module for any signs of wear or corrosion.
4
Inspect the ABS control module for any fault signs or physical damage.
5
Test the ABS system operation by conducting a road test to assess the functionality of ABS and traction control during braking.
6
Measure the resistance and voltage of the wheel speed sensors using a multimeter to ensure they are within specifications.

Solution

1. Preparation

Gather necessary tools and parts.
Disconnect the battery to avoid any electrical shorts.
Ensure the vehicle is on a flat surface and securely lifted if necessary.

2. Inspect ABS Wheel Speed Sensors

Remove the wheel to access the ABS sensor.
Disconnect the sensor connector.
Clean the sensor and mounting area with a brake cleaner.
Use a multimeter to check resistance (should be around 1,000 ohms; refer to service manual for exact specifications).
Reinstall the sensor and reconnect the connector securely.

3. Check Wiring and Connectors

Visually inspect wiring harness for any fraying, cuts, or corrosion.
Use a multimeter to check for continuity in the wiring from the sensor to the ABS module.
Repair or replace damaged wiring as necessary.

4. Inspect ABS Control Module

Check the ABS control module for any visible signs of damage or corrosion.
If necessary, remove the control module and inspect the connectors.
Reinstall the module and ensure all connections are secure.

5. Clear Codes and Test Drive

Reconnect the battery and use the OBD-II scanner to clear the C1553 code.
Conduct a test drive to confirm that the ABS and traction control systems are functioning properly.
Monitor for the return of any warning lights.