my Toyota Corolla E170 (2013-2019) won’t go into gear what’s the issue

Toyota Corolla E170 (2013-2019)

Error Codes

4-8 hours

Time

hard

Difficulty

high

Severity

3 min read

594 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix transmission issues in Toyota Corolla E170 (2013-2019). Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component

Transmission

Estimated Time

4-8 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical systems.
•Allow the engine to cool before opening any components to prevent burns.

Symptoms

•Difficulty or inability to shift into any gear
•Grinding noise when attempting to shift
•Clutch pedal feels unusually stiff or spongy
•Warning lights illuminated on the dashboard
•Fluid leaks under the vehicle
•Unresponsive engine when the accelerator is pressed in gear

Diagnostic Steps

1
Check the transmission fluid level and condition.
2
Inspect the clutch fluid level and look for leaks in the hydraulic system.
3
Scan the vehicle for any error codes using an OBD-II scanner.
4
Inspect the clutch pedal assembly for any mechanical issues.
5
Examine the transmission linkage for any disconnections or damage.
6
Test the clutch master and slave cylinders for proper operation.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Socket set
•Transmission fluid pump
•Drain pan
•Funnel
•Wrench set
•Jack and jack stands
•Clutch alignment tool
•Brake bleeder kit
•Clear tubing

Parts Required

•Transmission fluid
•Clutch kit (disc, pressure plate, release bearing)
•Hydraulic fluid for the clutch system

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Check the transmission fluid level and condition.
2
Inspect the clutch fluid level and look for leaks in the hydraulic system.
3
Scan the vehicle for any error codes using an OBD-II scanner.
4
Inspect the clutch pedal assembly for any mechanical issues.
5
Examine the transmission linkage for any disconnections or damage.
6
Test the clutch master and slave cylinders for proper operation.

Solution

1. Preparation

Gather necessary tools and parts.
Ensure the vehicle is parked on a level surface and the parking brake is engaged.
Disconnect the battery to prevent electrical shorts.

2. Check and Replace Transmission Fluid

Tools Required: Socket set, transmission fluid pump, drain pan, funnel.
Remove the transmission fill plug and check the fluid level; it should be at the bottom of the fill hole.
If low, drain any contaminated fluid and replace it with the manufacturer-recommended transmission fluid using the pump and funnel.
Reinstall the fill plug and ensure it is tightened to manufacturer specifications.

3. Inspect and Replace Clutch Components

Tools Required: Wrench set, socket set, jack and jack stands, clutch alignment tool.
Remove the transmission from the vehicle by disconnecting it from the engine, supporting it with a jack.
Inspect the clutch disc, pressure plate, and flywheel for wear and damage.
If worn, replace with a new clutch kit following the manufacturer’s guidelines.
Ensure the clutch alignment tool is used during installation to properly align the new disc.

4. Bleed the Clutch Hydraulic System

Tools Required: Brake bleeder kit, clear tubing.
Connect the clear tubing to the bleeder screw on the slave cylinder.
Open the bleeder screw, and have an assistant press the clutch pedal several times while monitoring fluid levels in the master cylinder.
Close the bleeder screw before releasing the clutch pedal, and repeat until no air bubbles appear in the fluid.

5. Reassemble and Test

Reinstall the transmission and ensure all connections are secure.
Reconnect the battery and check for any warning lights before starting the engine.
Test the vehicle by shifting through all gears to ensure proper operation.