my Toyota Corolla E170 (2013-2019) shakes when I brake, what should I look for?

Toyota Corolla E170 (2013-2019)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

3 min read

484 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix brake shaking in Toyota Corolla E170 (2013-2019). Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component

Brakes

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Always disconnect the battery before working on electrical components.
•Allow the brakes to cool before starting any work to avoid burns.

Symptoms

•Vehicle shakes or vibrates during braking
•Steering wheel vibrates when applying brakes
•Increased stopping distance
•Brake pedal pulsation
•Uneven tire wear

Diagnostic Steps

1
Inspect brake pads for wear and damage.
2
Check brake rotors for warping or uneven surfaces.
3
Examine the brake calipers for proper operation and sticking.
4
Inspect suspension components (e.g., control arms, bushings) for wear or damage.
5
Verify wheel alignment and balance.
6
Check tire condition and pressure.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Socket set
•Impact wrench
•Torque wrench
•Micrometer
•Brake cleaner
•Jack and jack stands

Parts Required

•Brake pads
•Brake rotors (if necessary)
•Brake calipers (if necessary)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect brake pads for wear and damage.
2
Check brake rotors for warping or uneven surfaces.
3
Examine the brake calipers for proper operation and sticking.
4
Inspect suspension components (e.g., control arms, bushings) for wear or damage.
5
Verify wheel alignment and balance.
6
Check tire condition and pressure.

Solution

1. Preparation

Gather necessary tools and parts.
Park the vehicle on a level surface and engage the parking brake.
Wear safety glasses and gloves for protection.

2. Inspect and Replace Brake Pads

Sub-steps:
1. Remove the wheel using a socket set and impact wrench.
2. Remove the caliper bolts and slide the caliper off the rotor.
3. Inspect the brake pads for thickness; replace if below manufacturer specifications.
4. If replacing, install new brake pads and ensure they are correctly positioned.
Tools Required: Socket set, impact wrench, torque wrench.

3. Check and Resurface or Replace Brake Rotors

Sub-steps:
1. Measure rotor thickness using a micrometer; replace if below specs.
2. If rotors are within specs but warped, use a brake lathe to resurface them.
3. If replacing, remove the rotor from the hub and install the new rotor.
Tools Required: Micrometer, brake lathe (if resurfacing), socket set.

4. Inspect Brake Calipers

Sub-steps:
1. Check for any signs of leakage or sticking on the calipers.
2. If any issues are found, replace the calipers.
3. Ensure caliper slides move freely; lubricate if necessary.
Tools Required: Wrench set, brake cleaner.

5. Inspect Suspension Components

Sub-steps:
1. Check for any play in control arms, bushings, and struts.
2. Replace any worn or damaged suspension parts as necessary.
Tools Required: Jack and jack stands, torque wrench.