FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
my Toyota Corolla E170 (2013-2019) makes a loud popping noise from the exhaust - Toyota Corolla
Home/Cars/Toyota/Corolla/E170 (2013-2019)/my Toyota Corolla E170 (2013-2019) makes a loud popping noise from the exhaust

my Toyota Corolla E170 (2013-2019) makes a loud popping noise from the exhaust

Toyota Corolla E170 (2013-2019)

Error Codes
2-4 hours
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
568 words

Problem Statement

Learn how to diagnose and fix loud popping noise from the exhaust in Toyota Corolla E170 (2013-2019). Step-by-step guide with symptoms and solutions.

Affected Component
Exhaust System
Estimated Time
2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Disconnect battery before working on electrical systems.
  • •Allow engine to cool before opening any components.

Symptoms

  • •Loud popping noise from the exhaust
  • •Decreased engine performance
  • •Possible rough idle
  • •Increased emissions
  • •Check engine light may be illuminated

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II scanner
  • •Socket set
  • •Torque wrench
  • •Fuel pressure gauge
  • •Exhaust tape
  • •Smoke machine

Parts Required

  • •New spark plugs
  • •Replacement exhaust components
  • •Fuel filter
  • •Fuel pump

Additional Information

Affected Component
Exhaust System
Estimated Time
2-4 hours
Difficulty
medium
Severity
medium
Tools Required
6 items
Parts Required
4 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather all necessary tools and parts.
  • Ensure the vehicle is parked on a flat surface and the engine is cool.
  • Disconnect the battery to prevent electrical shorts.
2. Inspect and Repair Exhaust System
  • Inspect for Damage: Check the entire exhaust system, including the manifold, catalytic converter, and muffler for cracks or holes.
  • Repair or Replace Components:
    • If a crack or hole is found, repair with exhaust tape or replace the damaged section of the exhaust.
    • If the catalytic converter is damaged, replace it with a new unit. Ensure it meets OEM specifications.
3. Replace Spark Plugs
  • Remove Old Spark Plugs:
    • Use a socket set to remove the ignition coil covers if applicable.
    • Carefully unscrew and remove each spark plug using a spark plug socket.
  • Install New Spark Plugs:
    • Gap the new spark plugs to the manufacturer specifications.
    • Install the new spark plugs, tightening them to the recommended torque value (typically around 13-15 lb-ft).
4. Check Fuel System
  • Test Fuel Pressure:
    • Connect a fuel pressure gauge to the fuel rail.
    • Turn the ignition key to the "On" position without starting the engine and check the fuel pressure reading.
    • If the pressure is below specifications, replace the fuel filter or fuel pump as necessary.
5. Inspect Intake System
  • Check for Vacuum Leaks:
    • Inspect all vacuum hoses connected to the intake manifold for cracks or disconnections.
    • Use a smoke machine if available to detect leaks.
  • Repair or Replace Hoses:
    • Replace any damaged hoses to ensure proper air intake.